Search results

Thanks for the heads up! I usually use WD-40 on something that makes noise and shouldn't. Never tried it on a hard drive though. :whistling:

If you're stuck in fwd how about a set of tire dollies? http://www.amazon.com/15-75-Inch-Long-Heavy-Capacity/dp/B01ATT4K0M/ref=sr_1_3?s=automotive&ie=UTF8&qid=1459818949&sr=1-3&keywords=Tire+casters Woodsy has a good ideea too. Worth a try. Jim

Doc, can you use a floor jack to raise the back to roll it out? Or maybe use your fel to lift it?

Thanks Mark!

SEAFOAM is GREAT!

I agree.

I don't know about the fit but what about just getting the B7000 and selling the B6000? Is the B7000 to large for what you are doing? Welcome to the Forum! Jim

Fineby me. Not near as bad as some other places. There's two rows of ads here. I think only one on FF???

Welcome to the Forum! Glad you found us. Jim

Welcome back Murph! A reset usually takes care of many problems. Try that first. I've also had a control board in a Genie go bad. Jim

MERRY CHRISTMAS! Jim

Two pieces of strap iron with spacers in between to make them fill the space between the two tabs for the top link on the implement. The other ends should be wide enough for the ball of the top link to go between them. I used to have a bush hog we fixed that way. It and the tractor were cat 2...

The arms are wider on cat 2 and the upper hitch point is higher. Your cat 1 might not spread far enough to fit. Sometimes you can turn the bottom pins around facing inward to fix this. Very likely you will have to change the pins too. I think cat 1 is 7/8" dia and cat 2 is 1" Jim

Here's the operator manuals for download on the Kubota Australia site. Select the category on the left. http://www.kubota.com.au/service/manuals/

http://youtube.com/watch?v=9vST6hVRj2A Edmund Fitzgerald sinking remains a Great Lakes mystery 40 years later By Edmund DeMarche Published November 10, 2015 FoxNews.com It was exactly 40 years ago Tuesday when "the winds of November came early" and took the legendary Great Lakes freighter...

I'm so sorry to hear about Belle. Jim

HAPPY BIRTHDAY!

The SUDT probably is overkill. I don't see it needing that high a grade. Does the manual make any recommendations? Jim

Bill, I'm so relieved to see you posting. Hang in there, we're all pulling for you. Jim

Let us know how everything goes! Jim