Search results

So after rebuilding the power steering control valve and putting a new power steering pump on the tractor I have steering to the right but it will not steer left. I have a pressure gauge in the main line from the pump to the valve and if you turn the wheel right it shows pressure but if you turn...

I'll try and get some on here thanks

I started buy taking the dash panel and battery box off of the tractor. Once they were removed I took the steering column apart and cleaned everything in the column and replaced the top seal and O'ring. Then I removed the transmitter valve and found that all 5 of the plungers were stuck so I as...

After looking my transmitter pump over I haven't found any kind of adjustments so I have bought a pressure gauge and I am going to test the pumps out put pressure. I put a new filter in the pump since the original one was stopped up and the side blown out of it, and it still isn't steering. It...

I ended up rebuilding the entire steering in the steering column all of the plungers and spring were stuck as well as the seals and o rings were bad How do I adjust the Transmitter valve. After rebuliding this part of the pump the tractor will steer left with no issue but is tight to steer right...

I have a 1963 Massey Ferguson 203 Industrial that I have rebuilt. Now that I have it running I can't get it to steer. I flushed the power steering pump because it had some kind of gray fluid in it and I replaced it with ne power steering fluid. when you try and turn the steering wheel the wheels...