Search results

Anyone have one?? If so did you order a kit and if so do you know the kit number?

Check this out. Didn't know they made such a thing. http://www.kioti.com/products/mechron-utv/mechron-2200ps/

My Son Danny sent me a text this morning saying him and my Grandson Dylan got blood in the Kubota. This picture was attached. Hunting on our farm.

Time for an Oil change. Drove onto the shop hoist, up in the air, pull the plug, while it's draining change the filter and look everything over underneath, replace filter and plug, let the hoist down........ Now fill er up with engine oil...... Oooooppppssss,,,, forgot to raise the bed...

I know some on here don't like TBN, so I'll disclose upfront, that's where my link below is sending you. View at your own desire. :) Free Electronic Manuals. Enjoy. http://www.tractorbynet.com/forums/parts-repairs/297907-kubota-wsm-frs-links-4.html#post4389000

After the 4th time I walked out of the timber to get the tractor to pull the RTV I decided I'd had enough of the factory tires...... So I bought a set of Blackwater Evolution tires. Last Fall I added an 1" lift kit to my RTV. With that I thought I could handle 27" tires. The Blackwater...

Anyone have a 1140?? I'd like to see pics of the bed/seat conversion along with any dialogue that might be applicable?? Thanks!!!

Anyone wonder why there are soooooo many visits to a thread compared to posters???? Maybe it's just me??? :) It's one of those things that makes you go Hmmmmmmmmmmmm...... :)

Let's see the view out your window??? Here's the view from my Shop East windows. Can see 32 miles Southeast.

Didn't know for sure what to title this thread. The other day my 6 year old Granddaughter was in the shop. She was looking at the RTV. With a wrinkled nose she pointed at those rubber rear fender extension things and said "what's that?". Okay, I can't be uncool in my Granddaughter's eyes...

Decided I'd build a lift kit. I'm always dragging my butt thru the timber. Thought maybe a 1" kit and then 27" tires might help that problem. Started with the front. Built six 1" spacers, three for each side. Had to take the strut nut off so I could get the top bracket off and drive out the...

Ordered a Hand Throttle Kit thru Messick's last week. Installed it this morning. Took 20 minutes. Could do a second one in half that time. Pretty straight forward. Kubota does a very good job of marketing option kits. They call them Whole Goods kits. And each has it's own specific number...

Anyone built a set of those?? Or maybe purchased a set?? Looking for ideas. Thanks in advance.

Decided I needed to see where I've been. So stopped at O"Reilly's and picked up a $9 convex round 5" mirror with swivel and mounting stud. Dug around in the iron pile and found a small angle bracket with hole. Cut it to length and welded it to the third from the left U-clamp that holds the...

The instructions with my Coast Valve were very Vague. With proper instructions this install would take about 10 minutes. Took me 30 minutes. Yeah, I'm slow....... The instructions say to remove the four bolts holding the bed lift hydraulic oil so it can be raised to access the 12mm hex head...

First thing I noticed when I got this RTV was there's no place to store anything. What was Kubota thinkin??? So I built this. Carried a piece of 4x4 square post around for a few days to make sure it wouldn't interfere with my foot space. Elevated it 1.5" off the floorboard so it's easy to...

I'll try to explain and clarify the adjustment of the Bypass Valve to allow for easier shifts. We've all experienced and dealt with our RTVs being stubborn to get out of gear. I believe the '08 and newer models have a double Bypass Valve that is operated by the pull knob on the dash and/or the...

I'm going to build a bed rack in a few days. What I'm after is to strengthen the bed sides and especially create a "headache" rack at the front. Idea would be to haul stacked loads of wood without worrying about bowing the sides. And to pile on large loads of dirt without dirt falling down in...

Recently purchased this unit used with 186 hours on it. I believe it to be a 2006 model. What's up with the difficult shifts??? Stop on an incline and can't get it out of gear without using the "pull knob" on the dash. Is that normal?? Does the modification to the valving in the HST fix...