Search results

  1. C

    50hr Service RTV X1100C PLEASED

    I had 60 hours some 400 + miles and found myself using high idle for better response. So after looking at work required and the stimulus check I decided to ask the dealer how much, as I had all the fluids and filters, negotiated service materials for 1000 hrs and service manual with purchase...
  2. C

    end caps on bed RTV-X11XX

    The corners of our dump box have ~1" tube that the sides are welded to. One of cap plugs on mine is missing. I know it will filled with debris and then rust. So I bought 4 CAPLUGS for 1" tube and they won't hold made for heavier gauge side wall. Anybody know where get these?
  3. C

    Real vs Synthetic oil for rust protection

    I've used old motor oil on farm implements for rust protection while sitting under the pole barn. Wash the clay off, sit them on wood blocks to keep them off the ground and then paint with old oil. Would synthetic work as good, not than many vehicles still use real oil. Guess I could use old...
  4. C

    Rust Worries X1100C ?

    Lately mine has had to sit out and water collects in bed near the cab. It is lined. What if I laid a piece of 2x4 under the front edge to give enough tilt to drain? Also saw that the bottom of the doors rust out, do they need drain holes and oil in cavities. Even though in Florida any thing...
  5. C

    HITCH CAMERA'S FRONT & REAR?

    I hate how long it takes to get hitches lined up front or rear. Has anybody mounted a backup style cameras to solve this problem
  6. C

    RTV-X11XX CVC SKID PLATES

    Does anybody make plates for A ARMS that keeps sticks from tearing the boots. They made them for the older models?
  7. C

    More power/speed no $$

    I was reading the SWAG Turbo install .pdf. What they have you do is advance the timing by removing shims under the injector pump. Increase fuel by adjusting the pump to max per cylinder. Then set the boost max to 5 to 7 pounds. But how do they get the HST to deliver that extra HP? RELIEF VALVE...
  8. C

    Rear Bumper for RTV-X11xx??

    So I backed into something the other day, so I've scene the bumper that connects to the dump bed pivot and floor. Comments? Any others?
  9. C

    Battery tender

    I'm going with BatteryMINDER 1510A got a 10 warranty from USA Company. Got best reviews on Amazon and the least amount of bad reviews. Comes with a pigtail to install in the car and set of clamps. 12ft cable. Also claims if you fully charge the batteries it will maintain 4 at once, and does...
  10. C

    RTV-X1100C Exterior Mirrors

    Opinions on factory version and do they have them for both sides. I put factory rear window screen on and it makes the internal mirror terrible. Third party? Found factory part nos 77700-V5059 $52.00 works on both sides ARE THEY ANY GOOD?
  11. C

    RTV-X?

    What year did the RTV-X's start?
  12. C

    Factory trained tech's ?

    Does Kubota have levels of trained tech's, I didn't see any plaques with names of certified techs at my dealership and the shop looked less equipped than my garage?
  13. C

    8/17 WSM RTVX1100C Wiring and HST

    Here is the link, they look very good, click on them to zoom in . https://postimg.org/gallery/1awxlcgio/ More people that read them the more we work on figuring them out.
  14. C

    TOO ADMIN

    PIC SIZE TOO SMALL wanted to load wiring diagrams and 800x600 is too small need at least 1920X1080.
  15. C

    Wiring Diagram 8/17 x1100C

    This out of the latest WSM thought it would help for people doing lights etc. Shows wattage of bulbs
  16. C

    Kubota observations

    kubota arrives tomorrow, funny thing about the Japanese their technical documentation it sucks. I first ran into this fixing my friends 1987 Kitamura CNC machine. Their drawings are like scrimshaw, tiny line drawings instead of annotated pictures and sentence structure is backwards. So instead...
  17. C

    Radio bracket rtv-x1100C? 2017

    This unit goes in the over head, was does it look like? Part Nos? Does it come with machine?
  18. C

    PICKUP INSPECTION NEW RTV-X1100C

    Going pickup new unit Monday after noon. Since delivery and pickup is not covered under warranty, I don't want to get it home and find something simple didn't get checked. So I was thinking of doing the neutral inspection. After being warmed up raise the rear wheels use the hand throttle and see...
  19. C

    Slow HST Servo Adjust?

    After reading on multiple forums some 900/1100 are challenged by inclines. Starting from simple to hard HST suction filter clogged, change filters put in SUPER UDT2 semi synthetic Link's between pedal and HST and Engine and idle solenoid Servo adjust high pressure side HST. My manual has not...
  20. C

    hand throttle?

    For 1100C they list two hand throttle kits 1 ENGINE HAND THROTTLE KIT D1105 $99.00 1 HAND THROTTLE KIT $146.00 So what is the difference?
Top