Search results

Just to conclude this story the parts were more like £550 .+ VAT before oil and new filters. Thats just the pump cradle, bearing and pump assembly and cover set. All back together and running. I was unsure if the motor shaft could be pulled out in the same way as the pump shaft so did not...

I thought I would update as I find a full story is useful to future readers like myself earlier this week. I removed the rear axle and the RHS brake assembly, then pulled the input shaft out through the back. I made a clamp out of a bit of poly propylene 12 mm sheet so I could attach a slide...

This is the first time I have worked on this machine. It clearly had the wrong filter as when I look it up it is an oil filter used on many cars. The swash bearing has failed and then the whole cylinder block of the pump has smashed up. The bit of plastic I found in the filter were the support...

I took the suction filter off and could see bits of black plastic that had not made it through the holes into the filter. I then cut the filter open using a pipe cutter wheel and a lathe. See picture. The was a fair amount of swarf in the filter (not sure how concerning this is?) The plastic...

Thanks for the suggestion but unfortunately it is not a gear selection issue. I managed to get the middle plug on the RHS out (glued a 1/4 allen key in with thread locker) and checked the charge pressure and it is only 1.6 bar 25 PSI with the oil cold. The part manual I have says 75 to 104 PSI...

Thanks for your quick response. Before I looked at it the Lads had taken the cover off and correctly inserted the selector rod in correctly. I subsequently check this and eventually ran the machine with the cover off and a wheel off the ground. When the pedal is pressed and it is in a gear, no...

I have read through all 22 pages of the all thread “kubota-rtv-900 transmission problems” which has been very informative. The machine came to me not moving at all and the driver had said it had got stuck in gear and they had removed the selector and corrected this. I am not sure if this...