Search results

I changed the fluid today. After 4 years and 89 hours the old hydraulic system oil looked ok but the transmission oil was gray with a bit of metal sludge on the magnetic plug. I'll run this for a few hours and change it again. Hopefully this was just break in sludge. You are right in changing...

I'll get the RPM up and re-adjust the linkage to see what I can get out of it. We have temps for testing, we are in the 50's this week instead of below 0. I'll have to stay with the worksite tires as they are too new upgrade yet. On another subject. My machine has 80 hours but it is 4 years...

I have not. I'm just using a Harbor Freight photo sensor tach.

Thanks again Aurthuritis!

I know the rated RPM for the engine is 3000, mine was set to 3170. What is the safe RPM setting for the system? I'm not concerned with maintaining emissions I just want to tweek my machine without hurting its' life.

Ok, I loosened the push pull cable back to where it was before I first messed with it. I redid the procedure where the speed lever and the throttle maxed together and the speed lever returned to neutral with no creep. Testing on the road I got to 23-24 mph. Testing with the rear tires jacked off...

I did the servo test with the rod detached and there was no movement. The servo is fine. I had shortened the push pull cable to eliminate play before I found your method. There is a little binding of the cable when you release the peddle. This will give me something to think about while I'm in...

Here are details of my machine: Used 2021 bought it 2 weeks ago with 77 hours Did the 50 hour maintenance changing engine oil and filter, fuel filter, transmission filters and topped off SUDT2 in both places. Adjusted the throttle high rpm stop to 3200 with a photo sensor tach. Tires are...

I'm guessing they're all set up differently. In what I've played with mine, a little adjustment can make a difference. When I follow the speed adjustments from the sticky threads and I back off of full speed lever travel a half turn mine is really hard to shift. When I have it in reverse it...

Hi, new owner here and new to the forum. My new to me machine has about 80 hours on it and has a hard time getting above 20 mph. I would like to adjust it to do 25. I found this on another TSB on another forum and I'm wondering how this would work with Aurthuritis' HVT pedal and linkage...