Greetings all-
Picked up a 2009 RTV900 with low hours (400), and working through maintenance and some other items.
I've got some front driveline noise when in 2WD. In high range, over 18mph, there is quite a rattle. I put it into 4WD, the rattle is gone.
I have the newer 1 piece CV style axleshaft, (is that the right word? the shaft that runs from engine/trans up front) and it looks intact. Also my front CV driveshafts seem intact. When in 2wd, tugging on the front left CV driveshaft there is a little movement. This also seems to be where the noise is coming from. Put it into 4WD....movement on that CV driveshaft is gone.
The machine is very clean for its age, it seems to have sat a lot. Where would you start looking?
Thanks
Picked up a 2009 RTV900 with low hours (400), and working through maintenance and some other items.
I've got some front driveline noise when in 2WD. In high range, over 18mph, there is quite a rattle. I put it into 4WD, the rattle is gone.
I have the newer 1 piece CV style axleshaft, (is that the right word? the shaft that runs from engine/trans up front) and it looks intact. Also my front CV driveshafts seem intact. When in 2wd, tugging on the front left CV driveshaft there is a little movement. This also seems to be where the noise is coming from. Put it into 4WD....movement on that CV driveshaft is gone.
The machine is very clean for its age, it seems to have sat a lot. Where would you start looking?
Thanks