B2710 hydraulic output

[Tusker]

Hi Folks . Just joined the forum .
I've a 2005 B2710 with 2000 hours .
I've a log splitter operating from the back spool , which works fairly ok . I measured the pressure and it's 1500 lbs and I think that's the mower up/down control . I believe there must be an other option to connect into that gives 1950 lbs as per spec . Anyone know where to connect into please ?

 

[Junkman]

Check pressure readings at your loader valve. It might be that you will need to boost the pressures in the system, however, I don't know the exact procedure for doing that. Best to refer to your service manual if you have one.

 

[Tusker]

Check pressure readings at your loader valve. It might be that you will need to boost the pressures in the system, however, I don't know the exact procedure for doing that. Best to refer to your service manual if you have one.

 

[Tusker]

Thanks for help . The tractor hydraulics are all up to specs. But the outlet for my spool valve is set @1500lbs
Does anyone know if there's any other outlet set at the 1950lbs .