Back Glass

[TWO GUNS]

How many have a back glass ?

Something to think about. You don't have to purchase one. Just some sort of lexan.

I purchased a sliding back glass, and like it much. Cut down on that cold axx air
flowing in from behind.

Stopped much of that rain water blowing in also !!!!

....... just something to think about !!!!


.............. jamie

 

[bordercollie]

Good Point Two Guns, I did find a piece the right size a while back and will have to try that- I'm not as tolerant of the cold wind as I used to be. I ordered extra clamps like Zoom recommended and just need to quit procrastinating do it. bordercollie

 

[Mark.Sibole]

Pictures?

 

[bczoom]

Mark,

You won't get pictures of mine... I took a 3x6' French door and mounted it horizontally. Yea, it sticks out a bit on each side but then I can look through the glass on the outside when backing up.

Oh, and of course I put the handle on the upper side so I don't bump it through normal use.

 

[TWO GUNS]

Mark,

You won't get pictures of mine... I took a 3x6' French door and mounted it horizontally. Yea, it sticks out a bit on each side but then I can look through the glass on the outside when backing up.

Oh, and of course I put the handle on the upper side so I don't bump it through normal use.

I'm jealous zoom, mine don't have a handle, which I always wanted one with handle. Want to swap back glass' ????????

 

[TWO GUNS]

Here ya go Mark,
Sorry, mine don't have handle .... But I'm in the middle of negotiations with member bczoom who has one with handle. Maybe he will swap with me.

 

[LongBlackRam]

Two Guns, There are some mighty strange looking critters lurking in the background of those pictures. I'd be mighty careful if'n I was you...

That glass does look nice though. Is it the same size as the mesh screen? How does the glass clear the mounting screw heads for the high rise air filter? Is there a gap between the mesh and the glass? LBR

 

[bczoom]

Yea, I have a handle, but you have curtains...

 

[TWO GUNS]

Two Guns, There are some mighty strange looking critters lurking in the background of those pictures. I'd be mighty careful if'n I was you...

That glass does look nice though. Is it the same size as the mesh screen? How does the glass clear the mounting screw heads for the high rise air filter? Is there a gap between the mesh and the glass? LBR

We learned years ago, just close your eyes, strange things usally disappear, if you open your eyes and they are still there. Start Shooting !!!!!

Same size as the screen. The high rise is mounted on the screen, and the mounting screw clear just fine. Yes, there is a gap between glass and mesh, matter of fact, I am fixin' to make the gap bigger. Just by adding a bigger spacer.

The gap under the window, above the seat can be taken care of by asking for that piece that goes there to cover it up. I did not know of that piece and one day, going to order it ....

 

[powerwagon]

ok, i'll bite where did you buy the back glass with a slider?

 

[TWO GUNS]

ok, i'll bite where did you buy the back glass with a slider?

ESSEX MANUFACTURING
Toll Free: 1-888-643-7739
In Dallas/Fort Worth: 817-847-4555