Climate Control X 1100C

BiffNH

Well-known member
NTT Patron
I have a problem with my 2021 RTV X1100C climate control selector. It is stuck on the upper vent mode. No matter how I turn the knob the air does not come out the defrost or floor vents. The knob does move, and it seems to have tension on it, but it certainly is not functioning. I removed most of the upper and lower dash panels, but I still have not been able to see the actual mechanism. Anyone in the forum have had this problem? I don't mind the upper vents -I use them most of the time anyway, but come winter I will want the floor and defrost vents!
 
Screenshot 2025-06-08 at 11.13.33 AM.png
I believe, the control arm circled in red is what controls the air to the different vents. Make sure your cable isn't bent, rusted or kinked. I would also disconnect the cable and ensure that the actuator can move manually. Lube up the cable and sheath with some dry graphite.Screenshot 2025-06-08 at 11.13.33 AM.pngScreenshot 2025-06-08 at 11.13.33 AM.png
 
Last edited:
Thank you Smilingreen. Nice photos! I don't know how my cable would have been compromised as nothing has happened or changed recently. I tried to get to the actuator but so far haven't had success. I can get to the temp actuator but have not been able to get up to the directional actuator. I only had an hour to explore and got stuck when I couldn't the steering wheel off. Not sure how to pull if off - I had no problem with my 2014 X900, but this one won't budge. Is there a way to get to the actuator without pulling off the entire dash?
 
These screen captures are out of the 2021 WSM, so there just isn't a lot of pics available. But, this shows where everything is in an exploded diagram.Screenshot 2025-06-08 at 5.39.48 PM.pngScreenshot 2025-06-08 at 5.40.00 PM.png
 
Top