got a massey 4710 and it had developed a rattling noise, so tore it apart and replaced the clutch damper, there was lots of dust, debris, ect. so knew it needed replacing, checked shuttle packs all was good no burnt disc, reassembled with any new oil rings, ect. as needed and still have a rattling noise. it is only when the shuttle is engaged but is much worse when shuttle is put in reverse. gearshift can be in neutral and shuttle engaged either direction and its Very Noticeable, all most sounds like a bearing that is gone, kinda at a loss cause everything else in the shuttle pack and trans looked good, any help would be appreciated