sawyer2678
New member
While brush cutting, my tractor started alarming with the gear symbol and the two arrows pointing at the gear indicating a "Hydraulic Clutch Low Pressure/Strainer Clogging" alarm condition. I shut the tractor off and checked for leaks or loose wires underneath the tractor but none were found. I need to know where the sensor is located for this alarm condition, if any of ya'll know I sure would appreciate the info. I haven't been able to find it in an online parts diagram or in my service manual. I restarted the tractor and the alarm immediately returned. I moved the tractor about 50 feet to a clearing and shut it off and haven't restarted it again. The tractor also displayed ERROR code: 2302, which means there's a "Short or Connecting Fault at the Strainer".