New toy!!!!

bczoom

Senior Member
Staff member
Congrats on your new tractor. Those little tractors will surprise you on what they can do.
For the box blade, they're pretty heavy so I'd go with something just a tad bit wider than your rear tires.
 

California

Super Moderator
Staff member
You'll love it. I run a little Yanmar about the same size and 18 hp. (Photo)

I now use the 18 hp for everything in place of the 24 hp Yanmar, which is now dedicated to just backhoe use.

That's the perfect size, if you need to maneuver around tight space.
 

Doc

Admin
Staff member
Nice. Congrats.
I had one just like that or close. It was a 17hp. Came with a belly finish mower and a little 4' brush hog. Awesome set up. Belly mower was hard on belts and that was the only issue I ever had with it.
 

johnny quest

New member
Ok. It needs new blades on the mower and they’re assbackwards. Pulleys turn counterclockwise. Everything I’ve seen is the opposite. If I turn them over the lift blows down. The blades are 16 3/4” each. Can’t find counterclockwise ones. Any suggestions.
 

bczoom

Senior Member
Staff member
Do the existing blades work or are they spinning the wrong direction?


Do you have a diagram for the belt(s) across the pulleys? Wondering if the belt isn't on correctly
 

johnny quest

New member
I scored a 3.5’. Cat 1 box blade for her. $175.00 on Craigslist. (Cha ching) I hooked it up and did some testing with it and the matchup was perfect. It’s a little rusted and has a ding or 2 but it’s an implement. The specs on this 372 say cat 0-1 so either will work on it. Found a 3 point hitch cat 0. Also. Now I can move trailers and things that require a ball hitch. Rock rake is next. Things are moving along great.
 

Attachments

Top