Rear axles

[Greg_63456]

We have tried everything to install our after market rear axles on our kubota 2008 rtv 900. The inside gears are lined up fine when we put the old axles back in but it will not allow the after market axles to go in. We have tried all the suggestions in the discussions. What are the chances that they sent the wrong axles?

 

[aurthuritis]

Compare them to the old axles. Especially the length of the stub and design.

 

[bordercollie]

After checking it as Aurthuritis said, and its as it should be , rotate the shaft back and forth, as you push it in and see if that helps. also comparing the splines with the old one as he mentioned is important.

 

[aurthuritis]

Yes exactly like collie said. Rotate back and forth to align the splines in the brakes and in the center differential. Thanks collie spot on.