RTV900 with Comoplast UTV T4S

B

brit

New member
Hi,
Does anyone out there have an RTV900 with Comoplast T4S tracks that could take a photo of the stabilizer bar connection brackets.
I just bought a used set that were installed on a RTV1100 and I'm not sure if the brackets will work or where the rear bar connects.
Any help would be gratefully appreciated.
 
I have an x900 with independent rear suspension.
Also, I just pulled the tracks off of mine for summer at least.
 
Poke,
Thanks for replying.
I talked to Camso and the rear bracket is different on the 900 from the 1100, so I have ordered it from my local dealer.
Did you leave the stabilizer brackets on your X900 when you removed the tracks and if you did could you take a photo of the front bracket.
Thanks.
 
I had to remove the stabilizer brackets. Which was a bit of a disappointment but still trivial in the overall song and dance... that way everything stays together. The bracket would stick out to where the tire wanted to be.

Now that I'm on wheels again, I can say that
- With tracks on, the machine is TALLER WIDER LONGER SLOWER HEAVIER. It will go anywhere but chews up the soil more than I like for regular work
 
You must log in or register to reply here.
Top