x1100c transmission cooler

[dieselfuel007]

I went to my local dealer looking for a hose on this cooler on the leftside of the machine it lays flat just above the fuel tank it looks to be a factory kit or something there is also a electric pump mounted to the back of the cab thats in line running to the cooler i haven't seen this on other machines does has anyone seen these before

 

[aurthuritis]

i don't have anything like that on mine. the transmission cooler on mine is in front of the engine and cooled by a fan mounted to the water pump. can you post a pic?

 

[Alaskanassasin]

I don’t think I can count the radiators on the x1100 on one hand but I don’t have that one!

 

[aurthuritis]

dieselfuell

do you have the K-Connect on your machine???

 

[dieselfuel007]

What’s k connect

 

[Alaskanassasin]

Auxiliary hydraulic connections

 

[aurthuritis]

What’s k connect

K-connect is that thingy were there is a front PTO and quick attach system for brushes and snow blowers and such. does your machine have an oil cooler in front of the fan on the engine under the seat?

 

[dieselfuel007]

I’ll have to look but I don’t have pto or hyd hookups

 

[dieselfuel007]

Do the k connect machines have this cooler

 

[aurthuritis]

Do the k connect machines have this cooler

I don't know. but you could look in Messiks online parts book and see.

 

[aurthuritis]

I don't know. but you could look in Messiks online parts book and see.

is your oil cooler under the seat missing?

 

[dieselfuel007]

yes it has the oil cooler under the seat

 

[aurthuritis]

wow this has me baffled. are you sure it is an oil cooler and not engine coolant? could i see a pic?
Thanks

 

[bordercollie]

This sounds like one of those special RTV models made for using those hydraulic tools like the hydraulically driven chain saws and such.They had/have an additional hyd cooler on the side..It's been a while since I read up on them.It was a model made for grounds keepers. bordercollie

edit: may be the Utility model ?

 

[aurthuritis]

This sounds like one of those special RTV models made for using those hydraulic tools like the hydraulically driven chain saws and such.They had/have an additional hyd cooler on the side..It's been a while since I read up on them.It was a model made for grounds keepers. bordercollie

edit: may be the Utility model ?

i didn't know KTC offered that option anymore.

https://www.youtube.com/watch?v=t3hyaxHo2Kc

 

[aurthuritis]

I FOUND IT. V6240 hydraulic oil cooler kit. an auxiliary oil cooler required for the V5260 rotary broom. page 16

http://www.securityfnh.com/assets/RTVX-Accessories.pdf

 

[dieselfuel007]

I bet that’s it but it doesn’t have any aux hydraulics wonder why they would have put a cooler on it

 

[aurthuritis]

maybe it had a brush attachment at one time and the dealers split it up on a dealer trade deal.

 

[Alaskanassasin]

I bet that’s it but it doesn’t have any aux hydraulics wonder why they would have put a cooler on it

Where do the lines go?

 

[dieselfuel007]

in the bottom of the rear axle