Latest activity

1. Change hst and hydraulic oil to sudt? Oem filters? Then let us know if it's better? If you could cut the filters open and unfold the...

1. Change hst and hydraulic oil to sudt? Oem filters? Then let us know if it's better? If you could cut the filters open and unfold the...

Got an old rtv900 I'm trying to figure out. Works perfect when the oil is cold, but after driving a mile, it slows down and finally...

Nice. Based on that do you think 28x10 would fit?

Thanks for your assistance. Torqued everything, no leaks. Mowed 4 hrs everything still tight and no leaks.

I hope you realize that's awfully risky. If you broke the bond between the manifold and the head, you risk having an air (and dirt) leak...

Updated; 12mm needed to loosen manifold. Doesn't have to be removed just loosened enough to allow the end fitting between the head and...

Hello, I'm having a problem and need some advice. I have to replace the rearmost #3 injection line due to pitting at the injector with a...

Welcome to the forum! What enticed you to join? What equipment do you have?

Hi everyone! I’m new here and excited to join the Nettractor community. I’m looking forward to learning, sharing ideas, and connecting...

Yes the battery is good. If I cross the leads at the starter it cranks right up.

Kubota rates the engines for 5k hours. so by that standard the engine is about 50% used up. I have however seen them go to 10k with...

Good to know Guy said it blows white smoke and starts to overheat pretty quick- 2700 hours and 14722 miles New tires a, alternator, and...

On a gasoline 1020 there is a solenoid on the bottom of the carb. Change that. Take off the gad cap and blow air back through the fueline.