Latest activity

You learn to feather the throttle pedal, so you don't eat the dash. The X series is not quite as severe, but you learn to drive which...

Here is the pinout schematic, if that will help you..... You could make a small bracket and attach one of these Push Buttons...

Hey, Mark I looked a lot and I to knew they didn't have a cab like that back when the tractor was made, but I was looking and it just...

You could always retrofit your existing controller with an aftermarket controller. It wouldn't be "plug-n-play", but with an ohm meter...

TOOK SCREWS OUT IT WON'T SPLIT APART FULL OF GLUE TO MAKE IT A SEALED UNIT TRIED TO BUY PART FROM FARM EQUIPMENT DEPOT WON'T GO THROUGH...

You learn to feather the throttle pedal, so you don't eat the dash. The X series is not quite as severe, but you learn to drive which...

I would stick with jd hydro oil not to much money 130 for 5 gal. Grease just good quality eng oil the same AIR FILTER best you can buy.

You learn to feather the throttle pedal, so you don't eat the dash. The X series is not quite as severe, but you learn to drive which...

If you need a Kubota Work Shop Manual try here www.kubotabooks.com I find the parts books are helpful as well.

It Looks like screws hold the 2 half's together, remove the screws, split the halves and spray all contact area's with a good grade...

Was just out driving my tractor and when I let off the forward pedal it was like the cruise was on. I sort of panicked and pressed on...

Oils have probably never been changed in many years. I'm sure JD is going to be expensive and wondered if there was something of good...

DOWN BUTTON WILL ONLY WORK BY WIGGLING BUTTON

https://www.orangeaftermarket.com/Coast-Valve-Kit-for-Kubota-RTV900-RTV1100-and-RTV1140_p_635.html

This is normal for that series of rtv. There's a small retard device attached to the hst cable that has given up the ghost. Research...