Latest activity

Welcome to the forum. Can you elaborate? Too noisy? Some component too loud? Nice and quiet?

NEW JD5075E

Thanks for that advice, I'd say your probably right.

Take the shock absorber thingy attached to the peddle cable and throw it away. Then get a coast valve.

Jack up the back both tires off of the ground. Start machine and put in high gear let idle. Confirm the hst speed lever is in the...

Doesn't look like they sell ATV tires. Neither does tirerack.

Last tires ( mud grips) I bought for the Roxor was about May of 2019 and got them on line from Simple Tire. They have coupons sometimes...

Still having this issue.... hoping to tap your collective brain power on this issue. I remved and cleaned the relief valve (attached to...

On the x1100c the oil cooler sits in front of the fan so no water. And the gearbox is independent and is its own reservoir. Do you use...

I‘d trust the machinist on this one. He sounds like an old-school guy who knows these engines inside and out. Boring them for new...

It's definitely an original diesel block, tye original cylinder head is done, I've bought a new cylinder, my question is it necessary to...

Just replace the plugs, and change your oil. The plugs are notorious for failure. If you want to get more involved in it then get you an...

On the x1100c the oil cooler sits in front of the fan so no water. And the gearbox is independent and is its own reservoir. Do you use...

Have an older x1100c. I am having a problem with water contaminating both the gear and hst trans oil. Correct me if I'm wrong, but...

Check to see if the block is a Perkins diesel block. I know some of them had the Perkins diesel block with gasoline heads and crank.