Farmwithjunk
Member
Howdy gang! Been swamped the last few days. Feeling good, and getting skinny. Lost 26 lbs so far.
I finally got around to painting my old disc. It's a #25 Massey Ferguson 7'-6" now. It WAS 8'-10" when I bought it. Too wide to haul, I pulled the axles, cut 7-1/2" off each and then re-threaded them. Re-installed with one less blade and one less spool per gang. New disc blades on the front gangs, best of the old ones on the rear. These are the absolute best working 3-point disc's ever made. The handles allow "on the fly" gang angle adjustment. They dig really well for their weight, they leave a nice level seedbed, and with the removal of a lock bolt, each gang can float several inches. I've got a whoppin' $310 wrapped up in this'n!
I finally got around to painting my old disc. It's a #25 Massey Ferguson 7'-6" now. It WAS 8'-10" when I bought it. Too wide to haul, I pulled the axles, cut 7-1/2" off each and then re-threaded them. Re-installed with one less blade and one less spool per gang. New disc blades on the front gangs, best of the old ones on the rear. These are the absolute best working 3-point disc's ever made. The handles allow "on the fly" gang angle adjustment. They dig really well for their weight, they leave a nice level seedbed, and with the removal of a lock bolt, each gang can float several inches. I've got a whoppin' $310 wrapped up in this'n!