You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Kubota rtv1100 front fender
- Thread starter liquorbox
- Start date
I was looking at the price of the bumper so I know what you mean. I needed to take my bumper off but the 4 bolts that held it inside the wheel well would only spin and not come out. I got the bumper off by leaving those bolts in place and took it off with the inner panels still on. After I had the bumper on the floor I took a air wrench and spun the bolts melting the plastic and pulling the brass nut out of the bumper right away. I ran a tap through each one before replacing the brass threads back in the bumper which I just heated up with a torch and pressed them back in place. A little anti-seize and it went together nice.
Alaskanassasin
Senior Member
I bought an rtv1100 that has a broken right front fender.
Wow! When I search for a replacement I got sticker shock.
I can't beleive what they charge for a piece of black plastic.
Drill small holes on both sides of the crack and stitch together with black zip ties
Drill small holes on both sides of the crack and stitch together with black zip ties
I would try a repair but the fenderflare is busted right off and they did not keep the pieces.
I will have to buy one or foigure a way to form one with what is left.
aurthuritis
Well-known member
there are several 1100 being salvaged on ebay. i would find some of the sellers and ask if they have a good front fender.