Doc's latest activity

Just guessing here, but "running bad" and gauges acting up at the same time. I have no specifics for what the problem might be, but...

Just find the return line and make it loop through the oil cooler and back into the return. Place the cooler out of the way and wire...

A few years ago posted about what I have done with mud flaps for my X1100C. Try this link...

It has been a while, but I have finally found the issue with the mode control - the cable got a kink in it at the control knob and when...

Our little town (we have 67 miles of road, 1 traffic light) is growing in a good way! We just got a Tractor Supply & Aldi's in town...

No problem. The pedal is super easy to use it takes very little pressure to operate. On mine there is several different ways to place...

I do have a hydro but it’s a Kubota 24HP B9200HST, strictly a mowing machine. It been fine but on a bigger working tractor I’ve heard...

II have a Hydro L5030 Kubota and I love the hydro! I use my tractor for snow removal in winter and also have a front end loader...

I found a nice oil cooler with its own fan on amazon that would make an easy install. Look up pit66 oil cooler. Add it to the low...

Definitely a pressure drop. Probably need to add an oil cooler. Probably be good idea to change the transmission oil too

I did not mean to suggest the spinner itself is causing the noise. I wondered if is was possible to over-heat the fluid or the steering...

I can't imagine a spinner causing that noise. I bought my 2015 RTV used and it already had the spinner on it. I planned to remove it...

I can't tell you enough how much I appreciate your help. Wanted to let you know what I've identified so far. First thing I did was...

Unfortunately, every tractor maker has different ideas on how to power all those circuits. Some like to tie a seat switch, neutral...

Guessing the oil pressure sensor would be the cheapest to buy and check to see if you truly have an issue. With hours that low I'd...