Recent content by e-wa

What type of bender do you use??

Use a heat gun and 2x4's to flatten the pipe to get your clearence

Yup, just like mine....only about $10 to do.

Mr Bill, how tall are your sides? I was planing on doing the same, but with a shorter swing tailgate.

Is the tank vented?

Fortunately I am on the dry side of the side of Washington, no mud.

Got the stoppers, thanks Peanut.

Canopy, Hoist, Grill Guard and new wheel and tires. Funny, I just bought this with only 14 hours, the previous owner had changed the tires. I found out when putting on the wheels/tires, I had 3 25x11x12 and 1 25x10x12. Anybody have a tire they want to sell?

Thanks for the update. rtk will do the same as far as path confusion. With the RTK you get to a 45* angle of the line you want , push the button and it autosteers and off you go. We skip a row on tight turn arounds and it helps a lot.

Ha HA

Glad I live in the desert. All we have is a mangy coyote once in a while.

$10 and a hour of work

Good to see that Spud Hauler. So do you haul spuds? We raise taters.

At this point there is no right or wrong , just different ways to get clean air. I will do it with the filter in the original position with a extended intake. both ways of doing it are correct and the goal of cleaner air is accomplished. Take care Peanut.

I have to disagree with you some on that Peanut. If you get your air intake up where the air is clean, there is no dust to stick to the pipe. The other point, if by some poor luck you get a hole in the high rise pipe, if the filter is up high you will suck dirt. If the filter is in the...