Search results

Hi Tinker...</p> I have a BLIZZARD Blade on my RTV900.. As long as the winch is in the cubby hole at the front, it will not interfere with the Blizzard quick mount. My blade is a 720 electric over hydraulic (power lift/lower, power angle left/tight. Once the mounting bracket is attached to the...

</p> </p> I have the same tires on my 900 (knobby) and I agree that they give me excellent traction on snow covered ice. Mud tires don't work well in icy conditions..in my opinion..</p>

</p> AND TWOGUNS CAMERA CAUGHT THIS SHOT OF HIMSELF ON THE LAST VISIT TO HIS REMOTE CAMERA>>></p>

PEANUT GOT HIMSELF A HOT TUB..</p>

</p> johndeeremho...welcome to the forum...if you are referring to the side rails and headache rack on my RTV, I built them myself with 1" square steel tubing and welded the bits with my MIG.</p> </p>

</p> Welcome to the forum...Where have you been all my shifting trouble life...It's so refreshing to get advice from someone who knows the RTV. Your advice is much appreciated. My unit still is reluctant to dis-engage (but it is far better than it was thanks to your advice). </p> How can I...

The shifting issue though descriptive of the overall problems encountered with the RTV in regards to the reluctance of the levers on the dash to co-operate with the operatorcan be several different problems.</p> Difficulties getting the shifter to engage into a selected gear from neutral ,if...

GFC....</p> I could not have phrased it better. I'm attempting to do a 'refined' CREEP adjustment today per instructions on other forum. </p>

rfritz.......</p> </p> I have the standard Curtis hard cab on mine (RTV900)with dual wipers, work lites, dual cab heaters, glass windshield etc. Yes the doors are a bit awkward (suicide doors) but they do remove easily. The Kubota factory cab on the 1100 is nifty and I'm pretty sure the...

This cab looks very similiar to one I saw at a local fall fair..didn't note the name... If it is the same, the doors aren't sliders. They open by pulling out from the cab and arcing backward. Could be wrong..it was a while back before I got my 900.</p>

</p> Hmmm! That's interesting...The drain plug on the transmission of a 900 is a 6 sided standard plug that takes a socket (at least the one on my 900). Wonder why they went to an allen???</p>

Just use a "back up alarm" available at any auto supply..Plug it in PARALLEL with the P-brake </p>

That blade will fit right on the RTV with the correct RTV end of the mount...as you say. Unfortunately the docs I have don't talk about the Kubota end. I,ve found the Blizzard people helpfull at the address below. Good luck.</p>

</p> If the home depot stores down your way are anything like the ones up here I can see why you would help people find stuff. Seems whenever one meets a depot staffer in an isle they avoid eye contact out of fear you might ask them to help you. I invariably go back there only because their...

For informational purposes....</p> The temperature sensor when measured with an ohm meter (sensor connector to gnd)</p> Temp of coolant Resistance</p> 120f..........................150ohms......approx</p> 175f..........................50ohms........approx</p>...

You hear that ONFOOT....Us Canucks complainin' 'bout the cold when those poor folk down in Louisana and Mississippi are shiverin' to the bone. Gonna start up a collection to send some 'mukluks' and hockey tuques to keep 'em warm. </p>

</p> </p> </p> Muleman............What ratio of kerosene do you mix with the diesel?? I've been using the winter fuel conditioner myself over the years to prevent geling. Curious as I've not heard of the kerosene mix before.</p>

</p> </p> Yup! Thats the name on mine now that you mentioned it..My 3 Kubotas all have cab heaters..RTV, tractor and F3060.The heaters in all 3 seem to need the rpm to be up in the 2k range before they start dumping heat. For the tractor and F thats no issue as they hand throttle in that...

Dang Tommy............While you were chowin' down on that good 'cajun stuff Mrs Kanook headed out to her sewin' class and told me to fend for myself...I settledfor a can of beans and a couple fried eggs....</p>

I have the conventional heater that runs off the cooling system of the RTV. Can't make out the manufacturer since I sand blasted the unit and repainted it. It was part of the Curtis cab kit and supplies heat through the cup holder opening on the drivers side and down towards the footsies at the...