Search results

I found the complete - easy to read - service manual at eRepairInfo.com for $29.00. It is a digital download in PDF. It is 465 pages for the 2022 X1100C. You can print the pages you need as you need them. It is a one-time charge. Easy and convenient. I highly recommend this.

I have communicated with the Jensen folks and I am to send it back. They gave me a RMA. We will see!

Actually it was a puff of Kubota Orange smoke!

I just took delivery of the new machine in December and have not had the radio out. I have not disconnected the power. I'll pull the 5 amp fuse. That is a good idea. The interesting thing is it is somewhat sporadic - and never happens when the radio is off when I start the machine up - only...

The lighted dial never fades and the clock has never had to be reset. The lighted dial shows no dimming when the starter is engaged. In fact this has only happened when the engine is warm and previously run. Never when starting in cold and when the glow plug has needed to be used and the...

Mine has not randomly started on it own, but the presets are lost. Interesting!!

I have the factory Jensen HD radio and the problem I have is that it quite frequently clears all the stations I have programmed in. It does not lose the time, nor is there a problem with loose connections. It happens after about 7 starts when the radio is left on. There is no interruption in...

It took some argument on my part, but Kubota did repair my broken bracket and they did weld the exhaust pipe to the manifold. I was without my machine for the better part of two weeks. I think it happened at about 600 hours as well. It was still fine when I sold it 7 years later with 11,000...

I had the same problem with my 2014 X900. Turned out to be a separation at the exhaust manifold. The muffler was press fit into the exhaust manifold with no reinforcement of a weld. The joint separated enough such that the entire muffler would vibrate enough so that the rear bracket would...

My cab is so tight I have to slam the door! The only dust that comes in when I stop and open the door and the dust I just kicked up follows in. I just use compressed air to blow it out. Before leaf-out my roads dry out really fast and now that leaves are coming out the dust will diminish.

I started a thread on this subject a few months ago. I use some heat shrink tubing and it has worked really well.

Thanks to you for providing the great information I ordered the materials and have installed a backup lamp and it is wonderful! Installation was fairly easy - kind of tight on the hands, but it worked out well. The second picture is with all the lights out in my shop so the light is certainly...

The screen looked fine but when we put diesel fuel in it nothing passed through. Not a drop!

The one I mentioned looked perfect. Put it back in and finally decided to check it again. Doesn’t make sense, but it was the problem! Before that we assumed the hydraulic pump was shot. Hope you have the same luck.

Have you checked the strainer in the hydraulic tank? On an old kubota tractor we found that the strainer looked ok but upon further analysis it couldn’t be cleaned. It didn’t leak diesel fuel when filled! We cut the strainer off replaced the plug and the tractor works fine now. Wouldn’t move...

Repairing for a friend. Don’t know much about history, but likely only a few hundred hours on oil. Looked ok but I think the strainer was never cleaned. 3-point hitch wouldn’t move. Now it is fully functional.

Mud season is approaching so I have been working on adding mud flaps to my new X1100C. I made rear flaps the same way I did for my old X900 - cut 3/16 rubber matting to shape and pop riveted to the fenders. I had them on my X900 for 7 years and they were as good as new when I sold it. These...

The suction screen is on the bottom of the hydraulic tank, I was just had an older Kubota tractor that had no hydraulic power and found that the suction screen was clogged. It looked fine, but even diesel fuel would not pass through it. Cut the screen off and now there is full hydraulic...

Filter new? Fluid full? Suction screen clean? How old is your machine?

Many thanks, Armyaviatr! Good snowy day or mud season project.