Search results

only if you replace any brake parts, just like in your car. It is to bleed the air out of the brake system.

looks like a bleeder valve for the brake cylinder on the trans axle assembly.

here is info from messicks. PLUG Part # E4181-33750 -PLUG Notes: M14X1.5X20DX12L I also saw that Kubota uses a subaru engine if that helps. Also here is the size. https://www.northridge4x4.com/part/f111n-fumoto-m14-1-25-drain-valve-w-nipple?msclkid=37b81c78c89511be90f7780a7148f844

I would have someone work the knob and see if it has the proper range of motion. Not sure if there is an adjustment on it.

On the newer ones the pressure relief is built into the brake pedal. I think the one you have they came up with a bridge solution before they redesigned the transmission.

Sorry for the bad intel on the year.

First year of production was 2013. Your local kubota dealer can tell you exactly what year it is and if there are any outsatnding recalls on it. Additionally they can tell you is if is stolen.

look at page S-8-14 in the service manual. you can get a workshop service manual at kubotabooks.com here https://www.kubotabooks.com/AutoIndex/index.php?dir=Utility%20Vehicles/

are the relays and fuses marked on the fuse box lid under the passenger seat?

Good luck. it looks to me that your best bet for parts is here: Dormer Road Thame Oxfordshire . I couldnt find a parts page for the UK. but here is the parts diagram from the US web site. This site seeme to be more accurate than Messicks...

They are not the same. I crossed a 900 pump with a x900 pump and they are different. The pistons on the assembly block are lapped into the block, meaning you can not change the pistons around inside the assembly. Even if they were the same I would shy away from that. These hydro units are...

The parts are readily available here in the US. I would bet Messicks would ship overseas but if you can get them from your dealer they would be cheaper.

On my X1100 the pump in the hydro unit exploded and damaged the case. Kubota does not sell the case and I could not find one from a salvage operation. One guy told me that is the main reason for these units(x UTV's) to be scrapped. I purchased a new unit from my kubota dealer. I paid $6k for...

I do not think that has any effect on the hydro unit. there is a precharge unit on the hydro that can cause you problems. go to kubotabooks.com I do believe there is a work shop manual there that will walk you through the trouble shooting of the hydro unit. here is the link. last entry on...

they fixed the shifter fork issue on the x models. since you have the hydro unit off it probably makes sense to open it up and check the status of the motor and pump inside. That unit runs between 6 and 7K for a new one. take a look at recent posts by sparks here...

did you replace the super UDT2 in the tank under the passenger seat and is that reservoir full? the suction screen can be plugged and the hoses can collapse causing problems.

get a sniff of it, if it smells sweet you will know it is coolant. That only works if you are using antifreeze. Not sure what you use in HI.

white smoke = water = either cracked head, head gasket or cracked block. Kubota engines are very robust except they don't do overheating very well. Once your engine overheats you can expect to replace the head. Fortunately aftermarket heads are inexpensive and plentiful. The Kubota heads are...

Not sure what month they started makin the X models, but my X1100 was made in 2013 based on the serial number. Go to kubotabooks.com and get a work shop manual, if you don't already have one. There are lots of smart people on here that will help you diagnose your problem. Part of the...

You should get some where close to 25mph, and yes it will be loud at that speed. Does it have a speedometer, or have you verified the speed with a gps/phone app? Also it would be helpful to know the year and how many hours are on the machine.