Search results

</p> Here is my update,,,,,,,,,,The first thing they did when i got there was check the two hst filters to see if any collapsed. The filters looked just like new.......Then they switched the filters and it ran slower than before.......The next step was to relpace all hst filters with new and...

I talked to the Service Manager this morning and he said they will make it right. He said he could send out the service truck to my area next week or if I would bring it to the shop, he would work on the RTV himself. I am going to take it to the shop tomorow morning....I will keep you guys...

Neil and Two Guns,,</p> When I talk to the service manager tomorrow, I will suggest that he replace all hst and hyd filters and flush the system......</p> Is there anything else you would recommend........</p> Thanks,,</p> Rusty Anvil,,</p>

The mechanic checked the fluid level and oil level and they were full.....The bill says that the mechanic used Super udt and 10-w-30 oil........32430 oil filter,,,14070 hst filter,,,,14080 hyd filter,,,43012 fuel filter,,,,When I went for a short ride down the main road tonight it didn't have as...

Re: What Two Guns,</p> You got your wish.......Read my problem......</p> Rusty Anvil,,,</p>

When I tried to load my RTV1100 on my trailer in High gear after the 50 hour service, it would not load on my tilt trailer....It ran good from the shop to the trailer but when I hit the bottom of the trailer and gave it more pedal it just reved like it was in neutral and would not go up the...

Re: 4th of July ALL FORUM MEMBERS............</p> Have a safe 4th of July..........</p> Rusty Anvil,,,,,,</p> P.S. Watch out for the fireworks going off over Two Gun's Plantation.........LOL.............</p>

DOUG,</p> Thanks for recommending the Grote mirrors......They worked out perfectly.......How is your Strobe Light project working out????????</p> Rusty Anvil,,,,</p>

Members update,</p> I installed the drivers side mirror yesterday evening and hope to get time to install the passenger side mirror today....Everything came out perfect....I used a 21mm drill bit and a 10/32 tap and 1/2 inch long hex head bolt. I clamped the mirror to the hinge and punched a...

Tommy,</p> You are a good story teller yourself........</p> Rusty Anvil,,,,,,,</p>

Forum Members,,,,,,</p> The last time I talked to Tommy he said that it was raining real heavy down in La.........I haven't heard from him since that time..............Then I was reading the local newspaper from La. called the SCHRIEVER TIMES and noticed a picture on page 6 that looked like...

Nick,,,,</p> Another great ideawith the scissor jack. Another great mind like Abraham Lincoln comes out of Illinois.......</p> Rusty Anvil,,,,</p>

ZOOM & Neil,,,,,,</p> Thanks for the advice........I finally figured it out......I sent a picture a couple weeks ago with the same file name.....</p>

Doug,</p> On the first picture, I have the light just sitting on the roof to show you what the (Z) holder looks like. The second picture is the end product............If you need any more info, just ask........</p> Rusty Anvil,,,,,,,,,,</p>

Doug,</p> I have one more picture to send but now I am getting a message from the administrator saying that I can't post duplicate pictures..........This is a different picture.........Neil or Bczoom what can I do to correct this problem.....</p> </p> Rusty Anvil,,,,,,,,</p>

</p>

Bczoom & Doug,</p> You areright BC, my mistake........It was early in the morning when I typed the reply...........60 degrees it is.......</p> Here is your picture of my setup.........</p> Rusty Anvil.............</p>

Doug,</p> As soon as I get outside I will take some pictures to show you. Of all the pictures I have, I don't have one of the side view of the plate. You can buy this plate at any welding shop.......You can get the thickness you want......</p> I think I have the 12mm steel plate.........The...

Doug,</p> You can make a plate of flat steel in a zig zag pattern ..(Z).. and you can put the strobe light higher than the roof, even with the roof, or below the roof. Depending on how long you make the Z pattern.....You can attach this to the middle light port in the rear of the roof or put...

River,</p> You did a real nice job on those mirrors......You thought it out first so they wouldn't shake or rattle using a 1/2 inch bolt......I tried a bunch of Auto stores for a good price but not many carry the Grote brand..........NAPA, Amazon.com, and Midway Auto Supply.........Got tired...