Search results

easy fix for them old air compressors that parts become obsolete.I have a craftsman air compressor and just rebuilt it all but the stupic 3/8 silicone sleve that holds the air line from the head to the tank.If you can find the sleeve they go from 20 to 40 bucks.I searched high and low for...

one of the simplest methods ive seen and used over the years instead of brute force is vibration.If you know anyone with a compressor and an air hammer place the nut back on the axle to prevent thread damage and tru using the air hammer.No only does it apply a hammering method but a...

hydro fluid only use the super utv 2 fluids from kubota.I have had no issues in temps at 20 below zero.As forr a tank of fuel all depends.While plowing in the winter a tank will last me 2 days and thats plowing about a mile of driveway with 8 to 10 inches of snow.In the summer while just driving...

hey get stuck very good.Try spraying it with pb blaster or some other penetraiting oil and try it again.If you have access to a press or an air hammer it will pop out.

PS actually as I didnt know how late it was to call them I just dropped them an e mail to see if they sell only a half shaft or if you have to purchase a whole shaft.Im hoping and praying they can sell just the half shaft or inner shaft.Ill report back with the answer when I get it. Have a safe...

I frequent several forums and have to honestly say this is the best onf for info and usually the info posted here ends up on other forums.Evidently we are the pioneers of things.Ms Bordercollie is a wealth of info and im no slouch either but we all work together to get out the best possible info...

I believe i seen someone here replace the shaft with possibly the rhino one.If I remember correctly they said it was a very good quality and went in no problems and it is a lot cheaper than a Kubota OEM shaft. Im about realy to tear mine down and replace the 2 outter joints before they get to...

OK on my 2004 there is something on the linkage right at the tranny if i remember right kind of looked like a pistion.It was there to reduce how fast the throttle released.It basicaly eased off thje release when you let the pedal off the floor.When mine went out it acted like a car when you...

In damper what are you refering to?

Nothing handles good on ice. In time when you get used to the maching the coast situation will not be an issue. As this is set up like no other machines out there I find it very useful especially when going down steep grades.I cant think of the last time Ive actually had to use the brakes on...

Your right the stakes wont hold it well.I added some tie downs on mione to some long stakes to hold it in place.Mine eventuallr ripped like I said due to a snow load but the material was really weak from UV rays.But it was still a very good investment. and Pics still there for me .Ill try...

Your right the stakes wont hold it well.I added some tie downs on mione to some long stakes to hold it in place.Mine eventuallr ripped like I said due to a snow load but the material was really weak from UV rays.But it was still a very good investment. and Pics still there for me .Ill try...

Same one I had.It lasted about 10 years before it gave out under a heavy snow load when i got sick. Mine had the side walls,back wall and fron door wall that you could completly enclose.

THe 05 should have had the 2 piece shaft as i dont think the 1 piece came out till 2007ish.Best way to tell is look at it .The 2 piece shaft is larger in diameter and will go from the front case to the tranny.If a 2 piece it goes from the front case to the carrier bearing on the middle frame...

if memory serves me there is a black shock looking thing that is adjustable.It has to do with the dynamic braking.Mine went bad 2 months in and it was like having no dynamic braking at all.I replaced it and all is fine for 10 years now.Ill loook it up tomorrow when im not jalf asleer.Look in the...

Day 2 of Youth HUnting and at 7:45 am Jacob dropped a nice big doe.Hes a happy 13 year old.Now hopefully Zachary can hook up tonight as its the last day of the 2 day season for kids before all the asshats and citiots get in the woods.

Ive had great luck with the ones you see on TV that collapse into a small ball and expand when you apply water to them.Ive had mine for 4 years now and no issues.They use a nice flexable rubber on them and atr basically made like a quality fire hose you see on fire trucks.

If you still have issues in low range i would check hydro fluid and filters and possibly a plugged fuel filter.They shoud have good power in low range.The machine oif mine has never been a real wheel spinner which would be nicer if it would.I Have found that during plowing if the fluid gets warm...

search through here or contact the seller he may have 1 http://www.ebay.com/bhp/kubota-rtv-900-parts

Also check Ebay.There are some sellers there that sell used parts from machines that were dead and they salvaged all the good parts for resale.