Search results

Nice work with the repair!

It's mounted on the factory windshield frame.

Go to amazon and search for 12v car coolng fan.

Pros: - cheap at $15 from amazon - easy install with adhesive backing - decent air movement - reasonably quiet - cord is just the right length Cons: - on/off switch is hard to reach and feels flimsy. My solution here is to turn the switch to high and leave it there and then control on/off with...

Second row solution also from ruggedgear.com. These can be quickly and easily removed when I need to convert to large bed 2-seat configuration.

My wife and I routinely shoot sporting clays and this is our setup. The gun rack is from ruggedgear.com.

As you noted, they dont stick out very far but they should work fine for backing a trailer. You might have to lean a little each way to see the back of the trailer when it is straight behind you. They will adjust out so far that you no longer see the rear of the machine in the field of view and...

Here are the side mirrors I used with the tempered windshield - https://www.ebay.com/itm/333222658891?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=CMXzBw4KRSa&sssrc=2349624&ssuid=SferA81iR5y&var=&widget_ver=artemis&media=MORE

Thanks for this Thanks for this info. I have a selection of band wrenches and cap sockets but it seems filter pliers are called for. I love any excuse to buy a new toy... er, um, tool.

I've got this service coming up soon on my X1140. Any good tips or tricks for getting these filters removed?

FWIW- The front hitch receiver on my X1140 is also a very tight fit.

Hood glare is not an issue at all. With the factory windshield you see very little hood anyway, but I do not see any glare on the small part of the hood this is visible. Regarding vibration, I do get some vibration when the machine is moving. Upon investigation, it appears to me that the RTV's...

I didnt go through the front window frame. I went around. I routed the wire to the back through this:

Front and rear light mounts...

Total cost was approx $200 and approx 12hrs of my time. I'll also add that I did have to modify the rear light wiring harness (cut and then add some length in the middle of the harness to both positive and ground wires) to make it longer to fit the 1140's long length but that was easy.

Installed Nilight LEDs + Nilight wiring harnesses (they include relays, fuses, and rocker switches) on the RTV over the holidays. For power, I ran a dedicated 12ga DC positive wire directly from the positive battery terminal. No new holes were drilled anywhere on the RTV for the install (well...

While my preference would be the factory bed liner, if I were in your position I would go ahead and buy now and then have a reputable after market installer do the bed liner. Reason being is that when I was recently shopping for my x1140, multiple dealers I spoke with said they are expecting a...

Here you go.