brandonian85
New member
Hey guys, would appreciate some guidance on the first 50 hours maintenance. Is it just an oil/ filter change plus the Trans and Hydraulic filters?
50 Hour Maintenance
- Thread starter brandonian85
- Start date
aurthuritis
Well-known member
just found this Kubota owners manual download FREE
https://kubota.ca/en/parts-services/product-manuals i just found this Kubota factory site. you can download your operators manual for your kubota
www.nettractortalk.com
brandonian85
New member
Thanks, but I'm still not clear on this. It has the double circle next to change engine oil, but it also has a note at the bottom that "the initial 50 hours should not be a replacement cycle".
aurthuritis
Well-known member
change the engine oil and engine oil filter. replace the suction and pressure filters on the transmission and top up the level on the transmission. i would go ahead and change the transmission oil also though. use oem filters and oem oil.
brandonian85
New member
Thank you
ItBmine
Well-known member
Gotta do mine this week. Got 50 hours on it now. I'm going to dump all the oils and filters. Just haven't decided if I will go one more cycle on dino oil in the engine or switch it to my Rotalla T6 synthetic now.
Got the call yesterday, my Boss vee plow is in but they didn't put the wiring harness on that shipment, so supposed to be in end of month now.
Got the call yesterday, my Boss vee plow is in but they didn't put the wiring harness on that shipment, so supposed to be in end of month now.
brandonian85
New member
I didn't think about switching oil, but T6 is what I use in my duramax, so i may as well use it in my rtv.
aurthuritis
Well-known member
coldest i ever had was -14 parked outside. glowed for 30 seconds and it fired right up. 15w 40 kubota oil.