Control arm Torque value

[avantiguy]

I just installed the new heavy duty strut/spring assemblies in my 2004 RTV-900 and I can find all the torque values for the front suspension except the lower A-arm to body bolts. The ones that have the rubber bushings.

Cars are usually 55 Ft lbs but can anyone give me the number for the Kubota in ft lbs after I set the RTV back on the ground.

Thanks in advance, Bob

 

[Tailrotor]

Anti
When ever I can't find a torque value on my equipment I always go with the German torque good n tight. Lol!!!

 

[Mark.Sibole]

When im unsure i give it the 2 finger on the wrench torque.

 

[OrangeBuggy]

Anti
When ever I can't find a torque value on my equipment I always go with the German torque good n tight. Lol!!!

That's good.....

 

[bordercollie]

I found some reference to the lower A arm mounting bolt and nut: 75.9 to 86.7 ft lbs.

 

[bordercollie]

This is a picture of what I found.. bordercollie

 

[avantiguy]

Thanks much Bordercollie.

Those #'s make sense as it took a fair amount of effort to break them loose. So that's what I'll put them back to.

It's great to have a most helpful resource like this forum. Thanks again, Bob

 

[bordercollie]

You are certainly welcome avantiguy. have a Blessed day. collie