Hey Coobie. I bought the Kubota 72" blade with my RTV this summer and I'm extremely pleased with it. It IS extremely heavy. I replaced the standard front struts on the RTV with the heavy duty ones. The bladecomes withan electric lift built in. Mine works very well. I don't have a winch. There are four bolts that you take out of the brush gaurd, place the blade support in position and replace the bolts with four that come with the blade, holding the blade support in place.The bolts that came in my blade hardware package were the wrong size. They were the right size, just the wrong thread pattern, much too course. I called the factory (they're made in the states) and within the week, the new bolts showed up in my mail box. Excellent service in my opinion and that may make a difference in blade choice. In fact, when I called the factory, I spoke with the engineer that designed the support bracket for the blade. The same company (factory) makes the heater and the cab, both of which I bought. I strongly recommend the heater too if you're going to be doing much in the winter. The little dude really puts the heat out after the engine gets warm. So far, we've put only about 10 hours on ours and I think my wife has 8 of those, she loves it. I installed all of the accessories myself to save some money and the heater, cab, and blade are not that difficult to do. All come with decent instructions. Hope this helps. Rog