I bought a used 2008 john deere 4105 with 60 hours. The 3-point lift arms will bleed down over night about 2 to 3" with rotary cutter attached. Also, while tractor is idling the lift arms will leak down an inch or so every 3 to 5 minutes and the hydraulics will quickly raise lift arms back up on its own. Just wanted to know if this is normal, Or should i have it checked out while under warranty.
john deere 4105
- Thread starter bulldog1
- Start date
I agree .......... !
That does indicate a less than new condition, but when parking your tractor, you should always lower the three point and front end loader and give the controls one last touch after killing the engine to ensure that the hydraulic pressure is released. This will make seals especially, but all components last longer.