Hi all, I bought this tractor bout 1 yr ago as a fixer upper. been sitting for years. Im getting around to working on it now. trying to install the foot & hand throttle and linkage. it the foot throttle was broken and linkage gone. I bought the linkage and pedal from Wengers . I have a shop & parts manual but it's not giving me the info I need to get it installed correctly and adjusted. does anyone have a MF 20? it's not a TO just a 20. has power steering hoses for the linkage to share the space with, & a shuttle shiftmine has the Perkins Gas. would love some pic's of the linkage from the foot throttle to the pivots & where the carb & Govenor Rods connect for the linkage on the left side of machine. not sure if a 135 with a foot throttle will be same.
MF-20 foot throttle linkage help
- Thread starter boatmoter
- Start date
Thanks. Diagram my parts manual., problem is, it does not tel me if #34 oem bolt tightens all way to #30 & 33. by the looks of the nuts on both sides of # 30 and no flat washers it tells me it may have to lock down on it. the OEM # 34 bolt has threads all way up to the head. if it doesn't lock down on #30 then it is a free wheeling adjustment. then I cannot understand how the hand throttle rod can move it without being locked down. and another problem is, does bolt #34 tighten down on #24? and the nut on the outside of #30, it's not a locking nut, so this is also confusing, it's like #30 & #33 tighten together..
