PLOW CONTROLLER PROBLEM 2015 RTVX1100C V5290 PLOW

[BRUSH]

WILL A CONTROLLER OFF OF A DIFFERENT PLOW WORK AND WHICH ONE THE 77700-4976 IS A SEALED UNIT CAN'T BE REPAIRED WANTS 1611.00 FOR A NEW ONE HELP

 

[Smilingreen]

WILL A CONTROLLER OFF OF A DIFFERENT PLOW WORK AND WHICH ONE THE 77700-4976 IS A SEALED UNIT CAN'T BE REPAIRED WANTS 1611.00 FOR A NEW ONE HELP

What is wrong with the controller you have now?

 

[BRUSH]

DOWN BUTTON WILL ONLY WORK BY WIGGLING BUTTON

 

[ZZZ2D1]

DOWN BUTTON WILL ONLY WORK BY WIGGLING BUTTON

It Looks like screws hold the 2 half's together, remove the screws, split the halves and spray all contact area's with a good grade contact cleaner.
You have nothing to loose. Also it's $239.65 at this place - https://www.farmequipdepot.com/product/kubota-77700-04976-handle-control-rtvx/

 

[BRUSH]

TOOK SCREWS OUT IT WON'T SPLIT APART FULL OF GLUE TO MAKE IT A SEALED UNIT
TRIED TO BUY PART FROM FARM EQUIPMENT DEPOT WON'T GO THROUGH PAST PAYMENT

 

[Smilingreen]

You could always retrofit your existing controller with an aftermarket controller. It wouldn't be "plug-n-play", but with an ohm meter, a pad of paper and a pencil, you could ring out which pairs of wires do what, find a aftermarket controller with the same amount of buttons, cut the plug off of the old controller, match up button functions with the new aftermarket controller and then solder the old plug onto the new controller. Just a thought.

 

[Smilingreen]

Here is the pinout schematic, if that will help you.....



You could make a small bracket and attach one of these Push Buttons externally and splice the wires into the proper wires.....

Twidec/6Pcs 12mm Momentary Push Button Switch 1/2" Mounting Hole On Off Mini Round Waterproof Black with Pre-soldered Wires PBS-33B-BK-X: Amazon.com: Industrial & Scientific

Twidec/6Pcs 12mm Momentary Push Button Switch 1/2" Mounting Hole On Off Mini Round Waterproof Black with Pre-soldered Wires PBS-33B-BK-X: Amazon.com: Industrial & Scientific

www.amazon.com