Remote Start for RTV1100.. Help Please

H

Highfly1971

New member
I purchased a remote start for my RTV1100 off of ebay. It works great, but the air or heat does not come on with the machine running until i turn the key on. Is there something that i can do to fix that?</p>


</p>


Thanks in Advance</p>


Kevin</p>
 
Welcome to the forum Highfly'71 ~~~ </p>


I don't have a clue ...</p>


That is one of them "Bigfoot " questions >>>>> Never seen the one, but not going to say there is not one !!!I would be careful, don't want no big mistakes on your RTV ~~~~ You might end up with Monsters singingin your machine !!!!</p>


</p>
 
I would think if it uses a relay for the fuel solenoid that would also turn the fan on if you wanted it to. I have a 900 and no heat or air so I can't offer specific advice.</p>
 
[quote user="Highfly1971"]</p>


I purchased a remote start for my RTV1100 off of ebay. It works great, but the air or heat does not come on with the machine running until i turn the key on. Is there something that i can do to fix that?</p>


</p>


Thanks in Advance</p>


Kevin</p>
<div style="CLEAR: both"></div>


[/quote]</p>


Sounds like your circulating fan is wired to the switch (fuse that is "hot" only when the key is in the on/run position). You could try re-routing it to the portion of the circuit in the remote start that supplies power to the fuel pump. That way you'd have power to the fan anytime the fuel pump is active. Just a guess on my part. If you are still on warranty though..best left alone.</p>
 
Have same kit, just wire a relay in so that when you turnremote on it energizes relay and feeds power to the accessory position on key switch, it is seperate curcuit from the run circuit.</p>


</p>


David</p>
 
You must log in or register to reply here.
Top