RTV 500 Wiring Diagram

NCRoadRunner

NCRoadRunner

New member
I want to add some additional front and rear lighting to the RTV. I would like to find a wiring diagram to find out what all the empty connectors (wrapped with blue tape) are for. I know during the speedo add I found a couple, and with the winch install a couple more. Thanks
 
Earlier, about a year ago, I was 'chatting' with someone on this forum who had ordered and was expecting to receive his manual for the 500. I'm sure that someone on the forum has access to the wiring diagram, and I would really appreciate it....
Thanks,
Henri Monnier
843.252.8678
 
To add the front and rear lighting you will need to locate the red/yellow 18 ga. wires...they are hooked to worklight relay.


The supply wires going into the relay are purple/black (18 ga) and red/green (20 ga)....the wires hooked to the lights are the red/yellow (18 ga) coming from the relay and the black (18 ga) common ground wire used for everything throughout the buggy.
 
You must log in or register to reply here.
Top