RTV X1140 rear bumper

Island Runner

Island Runner

Member
Does anyone know if the Extreme Metal Products rear bumper for the Kubota RTV X1100C and RTV X1120D will work on a RTV X1140? Has anyone installed one on thier X1140? I have not had a close look at those models but I would think the bed pivot points, where these bumper bolt to, would be fairly similar and in same relative location but I may be mistaken.

I do see Ranch Armor makes one specifically for the X1140 but it starts at $749 and the Extreme Metal Products one is $249 but does not say it fits the X1140. I am thinking of just ordering the Extreme Metal Products one and making it work as I do have a welder and plasma cutter but don't want to reinvent the wheel. I may just be better off fabbing up my own bumper but wanted to see if anyone has installed one. Thanks!

Rear Bumper, Kubota RTV X1100C and RTV X1120D

Kubota RTV Bumper
extrememetalproducts.com

rancharmorutv.com

Kubota RTV-X1140 Ranch Armor Rear Bumper

UTV Accessories that are Born & Built in Texas! 100% U.S.A. Sourced: Steel & Aluminum Tops, Bumpers, High Seats, Racks, & Nerf Bars. Made for: Polaris, Can-Am, Kawasaki, Yamaha, Kubota, John Deere, Honda, & many more.
rancharmorutv.com rancharmorutv.com
 
If you go to www.messicks.com look up the bumper for your tractor and click on the part number it will then tell you how many other machines the part will fit. I have found this tool to be one of the most valuable parts of their Kubota parts website. I would have looked it up for you, however, I am not familiar with your machine to know all the details. Many times there will be serial number cuts to a part with one part fitting an older machine with the same model number and a new part for a newer machine. The one thing that I have been doing for the last 20 years of owning a Kubota product is to download and print all the parts pages for future reference. Sometimes parts become obsolete and the part number is removed. If you have a part number you can check with multiple Kubota dealers till you find one that has it in stock. I located a replacement seat for my tractor that way and didn't have to purchase the more expensive "replacement" part number that superseded the original part number.
 
I think the bumper for the 850 sidekick would fit. I have not tried it but I plan to maybe this summer. something to look into.
 
Quick reply on the Extreme Metal Products bumper. After no response from the manufacturer, I just went ahead and ordered the bumper even though they say it only fits the X1100C and the X1120D and they were unsure if it work on the 2023 models. I have a plasma cutter, grinder, and welder in my garage so I figured I would just make it work. Turns out that the thing bolted right up and no modification was needed whatsoever. Just letting you all know it's an easy 10 minute install and looks great.

Rear Bumper, Kubota RTV X1100C and RTV X1120D

Kubota RTV Bumper
extrememetalproducts.com
 

Attachments

  • X1140 Bumper.jpg
    X1140 Bumper.jpg
    1.3 MB · Views: 16
  • Rear Bumper side.jpg
    Rear Bumper side.jpg
    1.3 MB · Views: 12
Does the Bumber block the visibility of the tail lights at all, My 2019 X1100c is licensed for the road and is certified for search & rescue, radio's and all.
 
Yes, the bumper sort of blocks the view of the tailights. The bumper does come with fairly heavy duty steel taillight relocation brackets which I did not install. The relocation brackets move the taillights up so they sit directly in the gap between the bumper and the bottom of the bed which in my opinion does give the taillight more direct visibility but less on the light is actually showing. As long as the vehicle behind you is more than 20 feet away, they will have no trouble seeing you with the tailights in the stock location. It's the short down angled view that the bumper blocks the taillights. I have considered adding an atv style or a truck tailgate Stop Tail Turn LED strip to the roof or maybe somewhere else but I really don't ride the road too much.
 
You must log in or register to reply here.
Top