Latest activity

When i bought this tractor it had 70 hours on it.It had just been serviced i ran it for about 40 hours and thought the hydro was acting...

Thanks. I’ll try that the next time I hook up to my 3rd function.

I thought I'd come back and let you know that it was a fuse. I thought I checked them but guess I didn't. The fuse panel label info is...

Hey @Brian B You posted and never came back. What's the resolution?

When you jumped the solenoid, you're talking about the one on the side of the starter, right? On many pieces of equipment the size of...

Agreed. On my skid steer, if the pressure isn't relieved , it will also be hard to hook back up. I relieve the pressure on mine by...

Agreed. On my skid steer, if the pressure isn't relieved , it will also be hard to hook back up. I relieve the pressure on mine by...

My 2014 X900 had the transmission flange at the muffler bracket break and it took some argument to get them to cover under warranty. I...

Have you pressure washed the inside of the sleeve connector? If you have, dont. The inner sleeve has to be able to move out when you...

I don't have those. First, and a main thing is to remove all the hydraulic pressure from the line and coupling. You then normally pull...

When you jumped the solenoid, you're talking about the one on the side of the starter, right? On many pieces of equipment the size of...

Is there a way to test the solenoid to ensure it is a good one. Sounds like even the new one might be bad. To often someone returns...

I have a late model 5145 that is in super shape with only 130 hours on it. I hooked up an attachment to my third function hydraulics...

I did not see any residue, but there may have been something. It was not going to come off without. a puller. Anti-seize is on it now!

I could jump the solenoid, so I thought that was the problem, but after replacing it, it still won't start. Replaced the 20A fuse just...