Latest activity

I am looking for misc MF 271 parts including fenders. There seems to be few available on line. Any suggestions?

i have a 1992 6610 cab tractor, with one tank, when removing fuel tank it fell and pulled wires to fuel sending unit off i have no idea...

Congrats. Looks great. I always wanted to go 'green' but they were so darn much more than the Kubota equivalent back when I was...

Here is the pinout schematic, if that will help you..... You could make a small bracket and attach one of these Push Buttons...

Hey, Sandelman It definitely sounds like you have a hydrostatic transmission pedal return issue, which is usually caused by a broken...

My bil only uses JD hyd and engine oils in his tractors. He's had JD tractors since the 1960's. We still have the 2 original 4020s ...

You learn to feather the throttle pedal, so you don't eat the dash. The X series is not quite as severe, but you learn to drive which...

Here is the pinout schematic, if that will help you..... You could make a small bracket and attach one of these Push Buttons...

Hey, Mark I looked a lot and I to knew they didn't have a cab like that back when the tractor was made, but I was looking and it just...

You could always retrofit your existing controller with an aftermarket controller. It wouldn't be "plug-n-play", but with an ohm meter...

TOOK SCREWS OUT IT WON'T SPLIT APART FULL OF GLUE TO MAKE IT A SEALED UNIT TRIED TO BUY PART FROM FARM EQUIPMENT DEPOT WON'T GO THROUGH...

You learn to feather the throttle pedal, so you don't eat the dash. The X series is not quite as severe, but you learn to drive which...

I would stick with jd hydro oil not to much money 130 for 5 gal. Grease just good quality eng oil the same AIR FILTER best you can buy.

You learn to feather the throttle pedal, so you don't eat the dash. The X series is not quite as severe, but you learn to drive which...

If you need a Kubota Work Shop Manual try here www.kubotabooks.com I find the parts books are helpful as well.