Recent content by BobH

Everything looks fine. The leaks occur across the whole top and not at any one point. Its almost like the windshield doesn't clamp down tight enough at the top but the dogs at the bottom seem fine. I was wondering if there was agenericproblem with a fix already worked out. I'll have to try to...

My 1100 is leaking at the top of the windshield between the gasket and the glass. Does anyone else have this problem or a fix for it? Bob</p>

I have a 1100 and I'm running 27" Super Grip Polished Aluminum Wheels with ITP 589 M/S 27x11x12s on the rear with ITP 589 M/S 27x9x12s on the front. They clear just fine without a lift. I had an unexpected test a few weeks ago when I had to go off roading through some very rough terrane with the...

My 1100s the same.

<P class=MsoNormal style="MARGIN: 0in 0in 0pt">On the 1100 the tank under the seat is a common reservoir for the dump bed and the power steering which goes to the two section hydraulic pump on the side of the trans. The hydrostat oil never leaves the transmission. Bob</P>

<P class=MsoNormal style="MARGIN: 0in 0in 0pt"><SPAN style="FONT-SIZE: 10pt"><FONT size=3>The Kubota answer is to unplug the dump bed quick connects and plug the angle cylinders in there. You use the bed dump valve to turn the plow. Mine is set up this way now but I’m modifying the hydraulics...

Nope, not yet. Bob

Does anyone know if the Kubota winch mount will fit with the Kubota/Curtis snow plow bracket on the RTV. I'm trying to decide if its worth buying themountor should I just make my own. I want to use a Ramsey 5000lb so I know I'll need to drill new holes. BTW does anyone know the output of the...

Yes it was easy. I removed the terminals from the Kubota connector and soldered them to the radio harness wired. I have the tools to remove the pins but you could cut off the wires just as easy. I used a $90ish Panisonic from Walmart but havent tried a CD yet. I wasn't going to put in a radio...

The Kubota/Curtis

I've gotten a lot of help here so i figure it's time to return the favor. I just put a radio in my new RTV an I thought some else might need the wire color code to put theirs in too. Black---------------------------Ground Red with white stripe------Always hot Green with white stripe---Hot in...

I'm still waiting too, for the front light and the rear light and the turn signals and the plow and the cover.......Good thing I'm installing them or the dealer never could have delivered it.

Following Two Guns advice I researched ITP 589s and Mudlite XTRs. The word from the tec guy I spoke to at ITP was the 589s were rated up to 1300pounds each depending on pressure. The 14" Mudlites sounded good but they don't make 14" wheels for the RTV and, for what I want to do the 589s sound...

I haven't seen a load rating on any of the ATV tires and the stock tires on my 1100 only say 6 ply on them. The only heavy duty ATV type tire I know of is the Essex Surefoot but they look like they'd be a little tough on the yard and I've heard they ride awfully hard. Any input on this? I will...

Has any one tried 25x10x12 Maxxis Bighorns on a 1100 yet or am I going to be the test pilot on this one? The stock atv tires look a little lost and hay, its only money[:)]. Bob