Recent content by razerface

Nobody knows? I hate to buy both as these tubes are kind of expensive in 26x12x12

I have a small leak in the tire beside the tread almost to the sidewall. The tires are on sti alumn rims that have a counterbore for the tubeless valve stem. Will the tubes that have threads and nuts on the valve stem fit this rim or will i need to find the straight rubber valve stem type?

Linked in?

I can’t plow in anything but low. Medium if snow is very light

No, i will try that. I am pretty sure it needs adjusting as i have driven other rtv1100 that had more power to the wheels then mine does since new. There are other times in the woods it needs it too, like pulling logs. I can’t run around with the throttle pegged all the time.

Fuel pump came up. I want transmission info. Thanks

Nobody knows?

No I don’t have arrogance to me,,,,,,i said it in two different posts.,,,,,,” I drilled holes in the tray and filled it with foam”. You just said it again. My tray looks different then the one in your pic.

I need to know where and how to turn the pressure up, and where/ how to measure that pressure.

You are kidding right? The tray is hollow,,or used to be before i filled it with foam.

My 2012 rtv1100 will not spin the tires when plowing snow, or pulling a heavy load. It has been that way since new. I was pushing heavy snow this morning with a boss 6’6” plow and decided i need to do something to make tranny stop “slipping” so much. I don’t need cutting edge adjustment, just a...

I drilled holes in my plastic tray and shot it full of foam. It helped.

Finally stomping each alternating brake for 5 minutes worked and it is now unstuck!

My 7610 differential is stuck like i am holding the pedal down. How to get unstuck? I have done figure eights, reverse, everything. It has been stuck for a year. I am afraid it will break something.

Thanks! Now back to our regular programing for rtvs!