bed measurements from a rtv 500

P

Peanut

Well-known member
hey Messicks i need some measurements from the bed of the rtv 500. i need to know how long the inside of the bed is and how wide of a lip the bed has at the top.i went by the dealer down here and i didn't see any 500's and i need to know how long to make the bed rails. so if you could can you get me some measurements?? ole buddy ole pal ole friend.lol</p>
 
ok so i need to make the rails 29-3/4 "long and i can make them drop down pipes to hold the accessories 4"deep am i right??? what about the lip on the bed how wide is it can i use the same width agle iron i used for the 900/1100 bed rails?? </p>
 
1" at the top. The angle ironfrom your other rails should work fine. </p>
 
</p>


I'd make the rails 33" long, whatever depth you want, with 1" to sit on the side of the bed.</p>
 
das right i don't know where i got 29 from whew!!! ok i'm on it . i'm gonna make these out of pipe because i find a bungee cord hooks better to pipe than it does the square tubing. the pipe is just as strong and will look just as good but will be more user friendly. ok now comes a tricky question i need to know a very close meaurement of how wide the inside the ned is because i want to make a seat that will fit inside of the bed rails when needed so if you wanna take the kids ride all you gotta do is pop out the weadeater attachments and pop in the seat into the same holes and way you go. if you can get me the measurements for the 900/1100 to that would be great i'll right them down for furture builds. oh and for anyones information messicks dealership is the only dealership that sells my stuff "i think" lmao so he can honestly say he can offer more attachments for the rtv than any other dealer in the united states.</p>
 
You must log in or register to reply here.
Top