rtv 500 bed rails

P

Peanut

Well-known member
ok messicks i just about got them 500 bed rails done with the chainsaw holder is there anything else you wanted on there too? sorry it took a while but i had a few other things to take care of like a rhino bumper some bootsavers and a few other things but the bed rails should be able to go out by the beginning of the week . so far i got the chainsaw holder weedeater holder and extention cord holder. does your dad need a beer holder too??? lmao with all these holders he just as soon get ashow-fur thats coonass spelling for a highpaid personal driver.lmao</p>
 
Sorry it took me some time to get back to you. We just had our first child Sunday, and got back home friday evening from the Hospital. Yea, that sounds great. Do you still have my shipping info? Drop me a line with what I owe you then. I also need to add in shipping from the first set of rails. </p>
 
[quote user="MessickFarmEqu"]</p>


<span style="text-decoration: underline;">We just had our first child Sunday, and got back home friday evening from the Hospital</span></p>
<div style="CLEAR: both"></div>


[/quote]</p>


<span style="font-size: x-small;"> CONGRATULATIONS !!!!! What was it ???? Really happy for you my friend >>>>>>></span></p>


<span style="font-size: x-small;">How's the Mother & Child doing !!!! Take good care of them .... They need you much !!!!</span></p>


<span style="font-size: x-small;">~~~~~~~~~ jamie </span></p>


<span style="font-size: x-small;"></span></p>


<span style="font-size: x-small;"> </span></p>


<span style="font-size: x-small;"></span></p>


<span style="font-size: x-small;"> </span></p>


</p>
 
first child??? man mine are just about grown i have one thats 20 and he's leaving for army boot camp in july my other one is akmost 15. good going on the kid . man to be just havin another kid again hum!!! i think i would have to stay in the woods longer.</p>
 
Messick Farm Equipment
ATTN: NEIL
187 Merts Drive
Elizabethtown, PA 17022</p>
 
sorry to pass the bad news to you neil but i have been havin some problems with my youngest son and my mind just hasn't been all here lately . well i messed up on the rails so i have to make one more i have one finished and one has to be redone it's 1"to long . i didn't realize til i put them next to each other to be painted and then i freaked out everything else is done so i'll throw another one together and get it right this time . the good news is i think the messed up rail will fit my rhino.</p>
 
they will be worth the wait trust me. i had another disapointment yesterday when my buddy came over and he was lookin at them and seen the otherone setting on the side and asked about it and i told him what happened and that i would just use it for the rhino. well he walked outside and tried it on and it's freakin too long .man it just ain't my week or month.then to top it off i go to throw it in my scrap iron pile cause i sell scrap iron to get the money to make this stuff and the dang thing comes flipping right back out at me and almost hits me so i can't even scrap it!!!! it's a cursed piece of iron i tell you.something is telling me not to get rid of that one bed rail it's like 33-1/2"long it's to long for the rtv 500 and to short for the 900/1100 i was thinkin of maybe useing it to mount to the tail gate on the 500?? how wide is the bed? that would give you bed rails on 3 sides .i might just throw it in the box when i send the rails and you can figure something out .lol.</p>
 
here's some pictures of the rails i tried my best to get that little ding out i packed the pipe with sand and everything but it still dings the pipe when i bend it?????these are some beavy duty little rails the pipe is i think 1-1/4 i'm redoing the chainsaw holder because i wasn't likin the setup i have the weedeater and other attachment holders made too those look just like the other ones that got to the 900/1100 bed rails.these are higher than the 900/1100 bed rails too.</p>


</p>


1007043ta4.jpg
</p>


1007045rv6.jpg
</p>


</p>


1007044pe0.jpg
</p>


1007047jp0.jpg
</p>
 
Tommy,</p>


Either clean up your stuffed varmints or I'M SENDING YOU STRAIGHT TO YOUR ROOM (with no supper)!!!!</p>
 
i had way more beanie babies than that . they are for my 5 chihauhas i have 2 ckc long hair males and 3 ckc short hair females i call them my "possie" thier names are and i'll go in the order of the leader of the pack down to the yungest .</p>


1. "beanie babie" she's the queen bee what ever she saus goes she will and can can up the c male dogs in the house at any point in time.</p>


2. "little bear" he thinks he second and we let him think he's second but he's really third but he the second to oldest . </p>


3. "mickey" "D" we got him and well we was lookin at him and called him a little chicken nugget then me called him "mickey "D" and he came runnin so he basicly chose hi name. we aslo call him mighty dog because he is fearless he is really number 2 under beanie baby but he came to us a year later so we put him 3rd in line.</p>


4 .then there's "little baby" she came to us one day when "little bear" and beanie baby hooked up she makes a year today infact.</p>


5. then there's "tinkerbell" as i call her or "tinker" but then my wife calls her "me" "me" so she really got 3 names and she comes to all three.she is tiny too we almost lost her when she was born she got so week she almost died i was trying everything to keep her going but she made it and she's still with us.i'll dig up some pictures i only have a few thousand </p>
 
ok when you carry your chainsaw would you rather take the sleave that is in the case and slide it in the bracket on the chainsaw mount on the rails or would you rather just slide tha chainsaw in the bracket like it is? and how deep would a reasonable sleave be?? the one i have made is ok for a 20" blade??? does anyone wanna see some pictures of what i got so for and give me some input of what they would like to see on one before it's finished???</p>
 
here's some pics of what i got so for . the chainsaw i got in it is a craftsman with a 16"blade.the good thing i see about this mount is you can put the saw in it and swing it around and probably work on it . i'm thinin of makin a little swing out table for the bed rails that would be neat.</p>


</p>


1007048pz6.jpg
</p>


</p>


1007051yq2.jpg
</p>


</p>


1007052ac6.jpg
</p>


</p>


1007053hj7.jpg
</p>


</p>


1007053oe2.jpg
</p>


</p>


1007055te3.jpg
</p>


</p>


1007057vt6.jpg
</p>


</p>
 
i wonder if all chainsaw chain sleaves are the same size?? the inside measurements of it are 2"wide4-5/8th's high by 20" long. my craftsman fits in it just fine so i'm hopin the other saw brands are close. i'm gonna put some eye bolts or drill some holes to hook the bungee cords up to hold the saw in place. so the saw isn't gonna move at all plus with it being on the angle that it is it will help stay put even if it does happen to come loose. so i guess i'll stick with this desgn and finish it up then if it gets the messicks aprovale that is???? oh what ever happened with them other rails??they bring you any luck?</p>
 
we've had the others on a machine in the showroom. Had some lookers, but not takers so far. </p>
 
You must log in or register to reply here.
Top