RTV Maintenance Schedule Chart

[Doc]

For easy reference ...

GENERAL CHECK POINTS MAINTENANCE TABLE:​

Please note: this table is generic for all Kubota products. We recommend that you consult the Operator's Manual for information on your specific model.

Check Points	Hour Meter Reading: Check or Change Every Interval Shown Below	After Purchase
	50	100	150	200	250	300	350	400	450	500	550	600	650	700	750	800	850	900	1000	1st Yr	2nd Yr
Engine oil & filter change	x			x				x				x				x			x
Transmission fluid change	x					x						x						x
Hyd. Oil filter cleaning	x					x						x						x
Front diff./wheel case oil change						x						x						x
Steering gear case oil						x						x		x		x		x
Battery electrolyte level		x		x		x		x		x		x		x		x		x
Greasing ALL zerks		x		x		x		x		x		x		x		x		x
Clutch pedal play		x		x		x		x		x		x		x		x		x
Brake pedal play		x		x		x		x		x		x		x		x		x
Toe-in check		x		x		x		x		x		x		x		x		x
Front axle front-back play				x				x				x				x
Clean air cleaner element		x		x		x		x		x		x		x		x		x
Clean radiator screen and check coolant level	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x
Fan belt tension			x			x			x			x			x			x
Fuel filter element						x						x					x
Valve clearance check																x
Check tire pressure	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x
Check tire wear	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x
Check all safety switches for correct operation	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x
Replace cooling system Anti-freeze																				x	x
Replace air cleaner																	x			x	x
Check power steering hoses																				x	x
Check fuel lines																				x	x
Check radiator hoses																				x	x

 

[Doc]

I am looking for an image showing where are the zerk fittings are. Will post once I find it.

 

[bczoom]

I am looking for an image showing where are the zerk fittings are. Will post once I find it.

Thanks. I put the grease gun on the RTV the other day but do need all the locations. My manual is buried.

 

[Doc]

Didn't find anything on the internet but I had a downloaded free manual for the x1100c. Hope it helps.

 

[ETF]

I'd be interested in that too.

I'm a great believer in grease. My father taught me. One of his sayings was, "Never spare the grease son. It's a lot cheaper than replacement parts".