Step

<P mce_keep="true">Rusty Anvil</P>
<P mce_keep="true">The 1100 has factory wiring in the two outside fronts and left rear. You should be able to buy the rockers from your dealer by themselves. They fit in the two rectangular openings on the left of the dashandthe plugs are already there. I extended my rear wire to the center for my work light. The factory rockers come with F & R designations on them which is nice. Changing wiring to the center in the front would be no problem either. It takes about 15 minutes to take the head liner out which makes it easy. The rockers come as part of the work light kits.</P>
 
Mattracks does make and sella aluminum runing board for the 900 rtv and the 1100 rtv. The 900 and 1100 runing boards are not the same. I have the running boards installed on one of my 1100 .I alsohave set of 900 and 1100 boards that have not been installed yet. I will try to get some pictures of the running boards. We use the running boards as steps and also use them to keep mud off the cabs, The boards also offer protection for the battery on the 900. </P>


James</P>
 
<P mce_keep="true">BCZOOM,</P>
<P mce_keep="true">I was thinking about the ECCO 6550A-MG strobe light........Does anyone have any other suggestions???????? and I was thinking about the 3049M golight.....................I have 15 inch clearance between my garage door and the roof of my Kubota........But that is with turf tires at 25 Inch.......I wonder how much more higher the Kubota will set when I get my 27 inch ITP XTR radials????????????</P>
<P mce_keep="true">Tommy,</P>
<P mce_keep="true">I will have to wait for the strobe and golight to arrive before I can give you some measurements for how high I can go with the mounts.........</P>
<P mce_keep="true"></P>
<P mce_keep="true">Rusty Anvil......</P>
 
<P mce_keep="true">Info for Everyone,,,</P>
<P mce_keep="true">I got my work light put on in the front and back over the weekend..........I also had help installing the turn signals and hazzard lights............I also installed the front mud flaps.......................I still have Tommys stick stoppers to install.......I have some locust wood to haul today so I don't know what I will have time to do today.......</P>
<P mce_keep="true">Rusty Anvil,,,</P>
 
That Ecco is a fine selection. It appears similar to what I use (6410A) but mine doesn't have the double flash. </p>

On the 3049M, as I recall, the "M" (for magnetic mount) is an aftermarket thing someone added to the 3049. The manufacturer doesn't make a magnetic mount. Also, (again, if I recall correctly), that magnetic mount version is a lot more expensive...</p>

Sounds like you have an 8' door. I don't have a light-bar and my GoLight and strobes are mounted right to the roof. I have plenty of clearance above.
</p>

</p>
 
<P mce_keep="true">james </P>
<P mce_keep="true">thanx for info on running boards.I looked at mattracks website but can't seem to find them listed anywhere on it.</P>
<P mce_keep="true">I'm going to keep trying.How did you get yours? thanx again</P>
<P mce_keep="true"> Solitude</P>
 
<P mce_keep="true">James</P>
<P mce_keep="true"> Thank you for info on running boards. I looked on mattracks website and could'nt find them.Where did you get yours?</P>
<P mce_keep="true"> thank you again</P>
<P mce_keep="true"> Solitude</P>
<P mce_keep="true"></P>
<P mce_keep="true"></P>
<P mce_keep="true"></P>
 
Mattracks sells the step but it is not on their web site. You can call and orderthe step or I could order them for you. I don't have the price with me at this time but I think that it was about 200 dollars plus shipping. The steps are aluminum and come un coated. I have coated mine black.I am attaching 2 phots of one of my 1100 steps.</P>


Phot </P>
 
Mattracks sells the step but it is not on their web site. You can call and orderthe step or I could order them for you. I don't have the price with me at this time but I think that it was about 200 dollars plus shipping. The steps are aluminum and come un coated. I have coated mine black.I am attaching 2 phots of one of my 1100 steps.</P>


Phot </P>one
 
Mattracks sells the step but it is not on their web site. You can call and orderthe step or I could order them for you. I don't have the price with me at this time but I think that it was about 200 dollars plus shipping. The steps are aluminum and come un coated. I have coated mine black.I am attaching 2 phots of one of my 1100 steps.</P>


Phot </P>one shows
 
<P mce_keep="true">solitude,</P>
<P mce_keep="true"> I've seen Mr. Biglanes Mattrack running boards. They are SHARP !!!!They are tough !!!</P>
<P mce_keep="true"> I myself, have plans on purchasing a set before next hunting season sets in...... Items like this is what I would like to see Kubota have for a accessory. But they would really have to step-up to match these running boards ~~~~</P>
<P mce_keep="true"><FONT face=JohnHancock color=#ff0000 size=4> ~~~~~ Two Guns ~~~~~~</FONT></P>
 
<P mce_keep="true">jbiglane</P>
<P mce_keep="true"> My dealer called this AM and told me he had a guy make steps for me.My dealer is about 6 hours away as I live on an island</P>
<P mce_keep="true">complete with a ferry etc. So I won't see them until I pick up my rtv either this week or next.I couldn't find out about steps or</P>
<P mce_keep="true">running boards till you told me about them for which I want to thank you.If these steps he built me aren't much I will call mattracks</P>
<P mce_keep="true">and order them. thanx so much for getting back to me with info. solitue(pat)</P>
 
<P mce_keep="true">jbiglane</P>
<P mce_keep="true"> My dealer called this AM and told me he had a guy make steps for me.My dealer is about 6 hours away as I live on an island</P>
<P mce_keep="true">complete with a ferry etc. So I won't see them until I pick up my rtv either this week or next.I couldn't find out about steps or</P>
<P mce_keep="true">running boards till you told me about them for which I want to thank you.If these steps he built me aren't much I will call mattracks</P>
<P mce_keep="true">and order them. thanx so much for getting back to me with info. solitue(pat)</P>
 
<P mce_keep="true">well just from lookin at them i see a few ways to improve them but i need a bolt hole pattern and the price would probably be somewheres around 100.00 but don't quote me on it .</P>
 
If I'm not mistaken, the setMr.Biglanethe setfor the RTV 900's, are much bigger and longer, they go way back toward the back wheel, much difference from the 1100the 900 sets >>>>>>>>>>>.</P>


<FONT face=JohnHancock color=#ff0000 size=4>~~~~~ Two Guns ~~~~~~</FONT></P>
 
<P mce_keep="true"><FONT face="Times New Roman" size=3>ain't that a picture of an 1100 you got there? the ones thats mounted i mean.</FONT></P>
 
You must log in or register to reply here.
Top