Stiff throttle

[Praetorian]

Does anyone know if there's a way to make the pedal any less stiff? Mine is hard to keep down for long periods of time.

 

[TWO GUNS]

Does anyone know if there's a way to make the pedal any less stiff? Mine is hard to keep down for long periods of time.

I thought they were all like that ......

 

[ZZZ2D1]

Yes, the return spring tension is adjustable - just make sure you grease the 4 zerk fitting's and keep everything lubed well.
I pressure lube all my cable boot's.

 

[Praetorian]

Is that something that's easy to do ZZZ?

 

[Praetorian]

I haven't bought a service manual yet but I'm more than capable if I know where to look for the spring adjustment.

 

[SpudHauler]

On my 1100 I removed the shiny gold springs found at the pivot joints for the accelerator and the brake pedals. Remove the four bolts holding the lower black dash cover and you will see them in under it. Much easier to press and both return just fine without them.

NOT recommended by KUBOTA, proceed at your own risk?

 

[TWO GUNS]

On my 1100 I removed the shiny gold springs

Good, I've heard of some being hard ....


.......... jamie

 

[chad450r]

Stiffness

I realize this is not adjusting anything, but I added the hand throttle and it was one of the best easy improvement to my machine. The pedal takes very little effort when the rpms are cranked up, this is great on long trips,plowing ect...