Search results

The 3pt and the drive pulses

Unless the 3pt hitch is all the way down, the hydraulics pulse on my tractor. Any ideas as to the cause?

Here is a video of the noise

New to me x1100c has quite a bit of hydraulic noise that seems to be coming from the charge pump/hst filter when it's at idle. Runs perfectly normal except for the whine. Is this normal? My other machine doesn't do it near this much.

I'm trying to get a cylinder head complete with valves from my kubota dealer to replace my cracked on in my rtv1100 with the d1105 engine. Dealer tells me he can only get a cylinder head without valves. Does anyone have a part number or source for a loaded cylinder head?

The chirp is still there but only does it when the belt is warm.

It was loose. They have an o-ring seal and are made to screw in tight.

Figured it out. There are 3 switches on top of the tranny. The center one that they call the safety switch just needed to be done up 1/4 turn.

My xg850 will be running fine, then the ecu cuts the engine power and R is displayed in the gearshift display. After it slows down a bit the power comes back and away I go until it does it again. If I wiggle the gearshift it will display the correct gear. Has anyone else had this problem and...

Worked on an x1100c for a neighbour this spring. 16000 hrs, 24000 miles. Still ran and looked great.

Question for other xg850 owners: When the machine is warmed up, I get a little bit of a belt chirp when starting out. Is this normal or do I have a belt problem?

You need to take the tamper proof cap off of the charge pump adjustment screw and turn it in a turn or two and see how it is.

Does the engine pull down when the speed decreases? If it does not, you could turn the charge pump pressure up to make the hst more 'positive'

If the engine is not pulling down, try turning the charge pump pressure up. That will make the tranny more positive.

Wondering if it might be a grounding issue.....after looking at the wiring diagram, does anyone know where Ground #1 attaches?

Fiddled around pulling fuses and relays.....now the instrument cluster lights work, but the speedometer still does not. When I first got the machine the speedometer was inop, but suddenly it started working.....any suggestions?

Machine is a 2012 RTV1100 Was messing around trying to get the taillights working. Not sure what happened, but now the instrument cluster lights do not work, when the key is turned to run the speedometer sweeps to full speed and then back to 0mph, and the speedometer does not work when the...

Is it possible to remove the engine from an rtv1100 without removing the engine/tranny/mission frame assembly?

I'm pretty sure you'll find that the hyd pump piston has come apart. It's repairable for about $1500 worth of parts. I've done 2 of them with the same failure.

I bought one once that had the harmonic balancer put on 180 degrees out. Shook like crazy. Take the balancer bolt out and see if the dots are lined up.