Recent content by menchhofer

Looks good. I did about the same thing and it is working out great.

try www.overstockwheels.com.

Are bar tires and turf tires the same height? I am mixing them on a different application and in order for them to work properly, they need to be the same height. thanks o' wise ones.

Any idea where a guy might find those lights?

Any ideas on best light for cab/instrument panel on the RTV? I know some of you have lighted switches which are very cool, but how about just lilghting?

Thank you for the information. I will do that

Thanks everyone. All the previous install pics only showed the front curved piece and I did not fully understand where the other parts went. Thanks pepr for the added explanation along with peanut and everyone else. I now think I can handle it.

Searched for install pics and found some but cannot find where to put the two triangle pieces for lack of a better description. Picture attached.

Okay...received stick stoppers from Peanut today and just wondered how to install them. I realize the smaller piece replaces the plastic one, but where/how does the other part fit? Just thought I would ask before I got dirty. thanks

Thanks everyone. I did not think it was going to be difficult, just thought I would ask before starting to remove the arrestor.

So, is removal of the spark arrestor no big deal?

Good luck...show pics when you are finished. I

I made the tubes 24 inches long. Not sure how much is above the side of the bed. You could make them shorter or higher depending upon your application. I did not want to go too tall for when the tail gate is open, the sides are not as sturdy. Don't forget to save the plastic inserts from the...

Squerly 1 inch square tubing. You can buy it at Menards, Lowes or a steel supply house. About 30.00 for a 24 ft stick. Lowes or Menards 9.00 per 6 ft or so.

The side rails are just made out of 5/8 deck boards. I used 1 inch tubing as the stakes. They slipped inside the tube on the bed and I placed the plastic inserts (taken out of the bed) on the top of the ends on the outisde of the tubing. Worked good. Sanded the ends of the deck boards, primed...