I have the MC Cruise now in two units. In spring, we will be putting in our third. We spray sometimes at 10-11.5 mph and it holds there just as well. Great product!
Amarillo,
The cruise is used all the time. The only issue I have with it is I can’t use it in low gear because of the kubota not the cruise. The neutral switch is worn and it’s a pain to get to. The cruise itself has worked flawlessly.
On our x1100c Kubota installed a hydraulic flow stop valve on a line from the ram. I then installed a toggle switch to turn it on and off. This solved the issue of the bed opening when the dump valve is in the normal position.
Bob
I am one of the few that actually had my accelerator pedal stick down. (caused by a rock getting stuck under the pedal) It was after this recall was announced and the first that our local dealer had heard about in our area. The fix was cutting approximately 4" off the top on the floor mat and...
We have run out twice with our x1100c and both times it started right up. Our gauge is way off. First time at 2 bars on flat ground and the second time on 3 bars on a slight slope. We fill her up at 1/2 tank now at about 5.2 gallons.
I believe that the tank under the seat is for the power steering and hydraulic lift. The transmission has its own reservoir in the transmission. On both of my x1100c's it has a yellow dipstick.
Thanks Paw. My iPhone plays it with no problem but on my computer I have to download the video then play it.
I will also try to make a video or at least some pictures of the install. It is real close to how it works in a car.
Bob
I have now had a bit of time with the cruise control. I am happy with it. I sprayed 100 acres the other day spraying 12 gallons an acre at 11.9 mile per hr. The acreage clicked off pretty fast. Done in just over 5 hours. Not having to worry about speed made the day much more enjoyable. I do...
As some of you know we do agricultural spraying with our X1100c. In March I started looking for a manufacturer that makes a cruise control for the Kubotas. After a lot of research I came across a company called McCruise in Australia. Due to the pandemic they have had issues getting parts but...